Re: any aftermarket reeds that fit 1983 NB50M Aero?
Posted: Thu Jul 21, 2011 3:30 pm
Okay,
Boyesen got back to me on a reed that should fit stock in the Aero 50. I have one on the way so we'll see if it works. If so, then I guess anyone with the 1983 NB50M could get one easily. Yay
Quote from the email:
"Our reed # PSR-196 should be a pretty close fit for your 1983 Honda Aero 50. Attached is a picture of reed # PSR-196, and the dimensions are: length = 1.535ÔÇØ (39.1mm) and width = 1.405ÔÇØ (35.8mm). These reeds are packaged as a set, to replace 2 stock reeds. The price for a set is $55.95 + shipping."
I was able to order a half set (the kit is sold with 2 reeds normally for whatever engine it fits, lol). One reed was 27.95 plus ship.
and if I finally figured out pictures....you should see the pic they sent of that reed.
Hope this helps others.
I'll post again when I receive and check fit.
Thanks
Boyesen got back to me on a reed that should fit stock in the Aero 50. I have one on the way so we'll see if it works. If so, then I guess anyone with the 1983 NB50M could get one easily. Yay
Quote from the email:
"Our reed # PSR-196 should be a pretty close fit for your 1983 Honda Aero 50. Attached is a picture of reed # PSR-196, and the dimensions are: length = 1.535ÔÇØ (39.1mm) and width = 1.405ÔÇØ (35.8mm). These reeds are packaged as a set, to replace 2 stock reeds. The price for a set is $55.95 + shipping."
I was able to order a half set (the kit is sold with 2 reeds normally for whatever engine it fits, lol). One reed was 27.95 plus ship.
and if I finally figured out pictures....you should see the pic they sent of that reed.
Hope this helps others.
I'll post again when I receive and check fit.
Thanks