45mm bore
Moderator: Moderator
- Pierce ramsay
- Spree
- Posts: 153
- Joined: Fri Jun 25, 2010 10:18 pm
Re: 45mm bore
10gram wieghts in my vari an the power jet is disabled should I go to 11grams or 10.5grams
- Pierce ramsay
- Spree
- Posts: 153
- Joined: Fri Jun 25, 2010 10:18 pm
Re: 45mm bore
Mystic wrote:you might try different weights or springs. with the ruima vari with 9.1 gram weights i got to 45ish at about half throttle
what kind of springs? the big spring in my clutch is a 1,500 and i believe that my 3 smaller springs are 2,000 springs i believe.
Re: 45mm bore
i have no idea about the springs as my bore doesnt put out much power, so havent really tried installing springs i dont quite understand how they work combined with the vari
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- Pierce ramsay
- Spree
- Posts: 153
- Joined: Fri Jun 25, 2010 10:18 pm
Re: 45mm bore
whats the best pipe for my set up? im shooting for great top end speed!
she is also a * to start when below 50degrees any help on that level would also be great!
she is also a * to start when below 50degrees any help on that level would also be great!
Re: 45mm bore
Richen up the idle mixture anywhere from a 1/8 to 1/2 turn (screw in the mixture screw).Pierce ramsay wrote:whats the best pipe for my set up? im shooting for great top end speed!
she is also a * to start when below 50degrees any help on that level would also be great!
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 45mm bore
for the price the v8 you have is probably your best bet most of the other pipes are made for 72cc and up
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- Pierce ramsay
- Spree
- Posts: 153
- Joined: Fri Jun 25, 2010 10:18 pm
Re: 45mm bore
Awesome thanks guys