What is a good pipe for the Polini Contesta?

[Mystic]

Have a contesta coming in the mail and I am wondering what is a good pipe that isnt too loud and wont break the bank but still allow optimal venting of heat but also keep the engine from over reving? I am thinking the V8 Typhoon is probably my best bet but I would like some opinions. I just cant see running the exhaust I have (kymco zx exhaust which is practically like an unrestricted af18 dio exhaust) Is there any danger in running the stock exhaust?

[bakaracer]

there is no danger in running a stock exhaust. if you really want to keep the noise down, put a airbox. the intake noise is really loud.

[Mystic]

do they make an airbox that is bolt on for the OKO?

[dun rite]

don't know if this will fit your scoot, but will fit the oko.
http://www.mopedsplus.net/index.php?dis ... t_id=29901

OOPs first time i sent image link, didn't hit the right button sorry.

[sum-azn-kid]

http://www.ebay.com/itm/PERFORMANCE-AIR ... 3f098bbe7d
if you run the stock side(no mesh) would be super quite but may lose some power.

[maddog]

stay away from that airbox just derestrict the factory one for your setup.

[Bear45-70]

Ignore the doggy, You will not get a decent fit with your OKO to the stock air box.

[Mystic]

hhahha I already know Bear, I have never actually heard anything useful from him. Plus I dont have any stock airboxes

[maddog]

for a few bucks more you could have a corsa, ask the bear how to convert the contessa into a corsa= its real easy

[kingkamehameha]

Ask wheelman about his pg short. Badass pipe

[Mystic]

From my research, the PG long/short requires a larger than 21mm carb and is a high rev pipe. The higher the revs and performance the shorter the lifespan of the motor in general.

[Wheelman-111]

Greetings:

I frankly can't tell much difference in performance between the PG Long I had and the Short I'm running now. The Long is poorly crafted and the baffle welds break inside the pipe, in my case within a year. It remains to be seen if the Short is any more durable. I've run 24 mm to 30 OKO carbs and they all seem to like to rev into the Mid-10s with either pipe.

[kingkamehameha]

Engines can be rebuilt. You have a quality kit made for high rpms why would you skimp out on the pipe. The v8 pipes are easy to tune but have a poor high end. The pgis a good all round pipe

[iRiE S0ULJAH]

id run a pg long , scorpion , arrow, windjammer all good pipes to hit the high speed wit a fine tuned!

[kingkamehameha]

Show us pics of all your rare pipes then slowjah