intake port

FullRace808 · Post by **FullRace808** » Wed Feb 29, 2012 3:24 pm

as i was building my 120 stroker. i was porting my intake and i thaught to my self, will it be better if i cut out the line in between the intake and make it bigger.
so instead of having 2 squares in the intake. will it be better to cut the thing in the middle of the intake so it makes the intake bigger? will it be better?

kingkamehameha · Post by **kingkamehameha** » Wed Feb 29, 2012 3:27 pm

Why dont you give it a try and let us know how it goes
Haha

evilone · Post by **evilone** » Wed Feb 29, 2012 3:39 pm

FullRace808 wrote:will it be better?

I don't know....weaker, yes.

bakaracer · Post by **bakaracer** » Wed Feb 29, 2012 4:03 pm

You don't want to cut that brace out. It holds the top section from flexing when it gets hot. Plus its only about 1mmto1.3mm thick anyways. Why risk it leaking on top for that extra 1to1.3mm. Not worth it.

Wheelman-111 · Post by **Wheelman-111** » Wed Feb 29, 2012 6:25 pm

Greetings;

Someone else here ax-ted that question about 2-3 years ago. A Respected Forumista replied:
nnnNOOOOOOOOoooooooo
Evidently someone (or several) thought the same and lived to regret cutting out that little brace. It is a pretty long floor right where the hot part of the case meets the cold. Don't do it.

tru72 · Post by **tru72** » Thu Mar 01, 2012 2:26 am

bakaracer wrote:You don't want to cut that brace out. It holds the top section from flexing when it gets hot. Plus its only about 1mmto1.3mm thick anyways. Why risk it leaking on top for that extra 1to1.3mm. Not worth it.

Dio89Elite · Post by **Dio89Elite** » Thu Mar 01, 2012 4:04 am

no
and can't explain it any better than what bakaracer already did. =)
(thanks bakaracer)

kingkamehameha · Post by **kingkamehameha** » Fri Mar 02, 2012 12:53 am

Do it! Makes your bike action

paulpauly7 · Post by **paulpauly7** » Fri Mar 02, 2012 1:27 am

King you tell other people not to be a D I C K in your threads and here you are doing the same thing whats up with that?

kingkamehameha · Post by **kingkamehameha** » Fri Mar 02, 2012 1:56 am

veedubh20 · Post by **veedubh20** » Sat Mar 03, 2012 12:04 am

Why do you want to build dio 120, it because you want smoke, spank animo jog motor? Come on. Get real!

bakaracer · Post by **bakaracer** » Sat Mar 03, 2012 1:28 am

veedubh20 wrote:Why do you want to build dio 120, it because you want smoke, spank animo jog motor? Come on. Get real!

here is an example of a dio smoking and spanking a animo jog style motor. in fact this is a piaggio watercooled 15k rpm 19hp+ motor getting spanked by yours truely on a dio powered 87 elite

http://www.youtube.com/watch?v=JWYboalo ... detailpage
ON board the derbi piaggio motor bike

http://www.youtube.com/watch?v=QhlA0McbYB0
on board a vespa with a 225cc lambretta motor

motormike · Post by **motormike** » Sat Mar 03, 2012 1:53 am

Wheelman-111 wrote:Greetings;

Someone else here ax-ted that question about 2-3 years ago. A Respected Forumista replied:
nnnNOOOOOOOOoooooooo
Evidently someone (or several) thought the same and lived to regret cutting out that little brace. It is a pretty long floor right where the hot part of the case meets the cold. Don't do it.

nnnnNOOOOOOOOOOOOOO........................................................................................................periods

Honda Spree and Elite 50 Forums

intake port

intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port

Re: intake port