Page 1 of 1
intake port
Posted: Wed Feb 29, 2012 3:24 pm
by FullRace808
as i was building my 120 stroker. i was porting my intake and i thaught to my self, will it be better if i cut out the line in between the intake and make it bigger.
so instead of having 2 squares in the intake. will it be better to cut the thing in the middle of the intake so it makes the intake bigger? will it be better?
Re: intake port
Posted: Wed Feb 29, 2012 3:27 pm
by kingkamehameha
Why dont you give it a try and let us know how it goes
Haha
Re: intake port
Posted: Wed Feb 29, 2012 3:39 pm
by evilone
FullRace808 wrote:will it be better?
I don't know....weaker, yes.
Re: intake port
Posted: Wed Feb 29, 2012 4:03 pm
by bakaracer
You don't want to cut that brace out. It holds the top section from flexing when it gets hot. Plus its only about 1mmto1.3mm thick anyways. Why risk it leaking on top for that extra 1to1.3mm. Not worth it.
Re: intake port
Posted: Wed Feb 29, 2012 6:25 pm
by Wheelman-111
Greetings;
Someone else here ax-ted that question about 2-3 years ago. A Respected Forumista replied:
nnnNOOOOOOOOoooooooo
Evidently someone (or several) thought the same and lived to regret cutting out that little brace. It is a pretty long floor right where the hot part of the case meets the cold. Don't do it.
Re: intake port
Posted: Thu Mar 01, 2012 2:26 am
by tru72
bakaracer wrote:You don't want to cut that brace out. It holds the top section from flexing when it gets hot. Plus its only about 1mmto1.3mm thick anyways. Why risk it leaking on top for that extra 1to1.3mm. Not worth it.
Re: intake port
Posted: Thu Mar 01, 2012 4:04 am
by Dio89Elite
no
and can't explain it any better than what bakaracer already did. =)
(thanks bakaracer)
Re: intake port
Posted: Fri Mar 02, 2012 12:53 am
by kingkamehameha
Do it! Makes your bike action
Re: intake port
Posted: Fri Mar 02, 2012 1:27 am
by paulpauly7
King you tell other people not to be a D I C K in your threads and here you are doing the same thing whats up with that?
Re: intake port
Posted: Fri Mar 02, 2012 1:56 am
by kingkamehameha
Blah
Re: intake port
Posted: Sat Mar 03, 2012 12:04 am
by veedubh20
Why do you want to build dio 120, it because you want smoke, spank animo jog motor? Come on. Get real!
Re: intake port
Posted: Sat Mar 03, 2012 1:28 am
by bakaracer
veedubh20 wrote:Why do you want to build dio 120, it because you want smoke, spank animo jog motor? Come on. Get real!
here is an example of a dio smoking and spanking a animo jog style motor. in fact this is a piaggio watercooled 15k rpm 19hp+ motor getting spanked by yours truely on a dio powered 87 elite
http://www.youtube.com/watch?v=JWYboalo ... detailpage
ON board the derbi piaggio motor bike
http://www.youtube.com/watch?v=QhlA0McbYB0
on board a vespa with a 225cc lambretta motor
Re: intake port
Posted: Sat Mar 03, 2012 1:53 am
by motormike
Wheelman-111 wrote:Greetings;
Someone else here ax-ted that question about 2-3 years ago. A Respected Forumista replied:
nnnNOOOOOOOOoooooooo
Evidently someone (or several) thought the same and lived to regret cutting out that little brace. It is a pretty long floor right where the hot part of the case meets the cold. Don't do it.
nnnnNOOOOOOOOOOOOOO........................................................................................................periods 