I've been looking on this forum and I think I am going to do a pulley mod on ny 84 spree this weekend
If you have experience with this and not just an opinion I would love to hear it also any tips
Thanks
spree pulley mod good or bad
Moderator: Moderator
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: spree pulley mod good or bad
It will give a little more top but you will lose low end.
taz
taz
-
- Goped
- Posts: 70
- Joined: Mon May 28, 2012 6:30 pm
- Location: .
Re: spree pulley mod good or bad
i did it quite afew years ago. I ended up using some washers to (finely tune it) adjust the spacing. But it is a mod def. worth doing to the spree.
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: spree pulley mod good or bad
I just put the wider belt AX-24 on my 84 and that got me some more top end. But with the pully mod as someone mentioned can be tuned a little where the belt install cannot. And the pulley mod is pretty much free too. Measure your belt before you start just to make sure its not too thin to begin with and replace the belt with a new one. That may get the top end you are looking for it may not but it will make sure that everything is right before you start making changes.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock