A cheap ZX rear pulley, super common.

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

A cheap ZX rear pulley, super common.

Post by LMH »

All GY6 chinese bikes have them, not only that but they also have a larger variator than the dio. As far as Ive seen all 139qmb variators, drive/n faces rear pulley and clutch, belt, and rollers work on a dio. The transmission part is another story, that is for the zx50, its a duplicate of the zx gearing. If there are after market gears for them they "should" work for the zx. Later on if I get time I will remove the gears from a spare gy6 laying around to verify. But certainty on the ZX rear copy.
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: A cheap ZX rear pulley, super common.

Post by LMH »

Ive found rear pulleys from a local scooter store owner for 10$ each, I bought 6.
User avatar
sum-azn-kid
Elite
Elite
Posts: 333
Joined: Mon May 24, 2010 2:04 am
Location: Hawaii, Maui

Re: A cheap ZX rear pulley, super common.

Post by sum-azn-kid »

watch out those chinese ones may crack easier. id rather get the sym dd50 trans over the chinese gy6.
2007 SYM DD50- baby blue 72 "Daily rider"-sold
1988 Honda SB50P-on going project
zuma 125-sold
Ninja 250r-totaled
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: A cheap ZX rear pulley, super common.

Post by LMH »

Like I said, cheap. 10 bucks each cant complain. I have 4 extra kymco zx50 pulleys but couldnt pass up the deal. Its nice to be able to put 5 different contra springs in 5 different clutch set ups and test them out for fun.
User avatar
paulpauly7
CB900F
CB900F
Posts: 1945
Joined: Tue Feb 21, 2012 6:57 pm
Location: nz

Re: A cheap ZX rear pulley, super common.

Post by paulpauly7 »

your right there i have 4 rear pulleys each with a different contra springs it makes trans tuning much faster
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
maddog
CB900F
CB900F
Posts: 2228
Joined: Mon Jul 23, 1973 10:24 am

Re: A cheap ZX rear pulley, super common.

Post by maddog »

If you run cheap parts i have the right to dog you out, if you run quality parts like i do you gain my respect.
some people dream of speed, i own your dreams!
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: A cheap ZX rear pulley, super common.

Post by LMH »

I guess some people cant read, it says cheap not expensive or great. Idiots cant read its not my fault.
eliteE85
Goped
Goped
Posts: 98
Joined: Wed Jan 16, 2013 9:58 am
Location: Massachusetts, usa

Re: A cheap ZX rear pulley, super common.

Post by eliteE85 »

LoveMyHonda wrote:I guess some people cant read, it says cheap not expensive or great. Idiots cant read its not my fault.

hahah
User avatar
Trafficjamz
CBR1000RR
CBR1000RR
Posts: 5353
Joined: Tue Jul 14, 2009 7:53 pm
Location: Eastlake, MI
Contact:

Re: A cheap ZX rear pulley, super common.

Post by Trafficjamz »

what 4 contra springs

stock, 1k, 1,5k, and 2k?
what is the cam profile on these Chinese pulleys?
Do these rear pulleys twist as they expand? or does it come straight out and then twist?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: A cheap ZX rear pulley, super common.

Post by LMH »

Its the same as my zx pulleys, twist out. I can try to take a side shot of it later on this weekend.
maddog
CB900F
CB900F
Posts: 2228
Joined: Mon Jul 23, 1973 10:24 am

Re: A cheap ZX rear pulley, super common.

Post by maddog »

Guess you can't afford a stage -6 clutch= cheap azz :smile:
some people dream of speed, i own your dreams!
yurself
Goped
Goped
Posts: 68
Joined: Sun Jan 29, 2012 2:53 am
Location: Tampa FL

Re: A cheap ZX rear pulley, super common.

Post by yurself »

Hey Maddog
Can you post some pictures of YOUR stage 6 clutch installed? What are you running it on? As its said on other forums "pics or BS" or "pics or it didn't happen"
User avatar
paulpauly7
CB900F
CB900F
Posts: 1945
Joined: Tue Feb 21, 2012 6:57 pm
Location: nz

Re: A cheap ZX rear pulley, super common.

Post by paulpauly7 »

the dog does not post pics cause he is to cool for us
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Post Reply