Honda Spree and Elite 50 Forums

Hi im looking for a big bore kit for my 86 spree. Everyone talks about TAZLAND who is he and how do i buy one of his kits. Thank you!!

look him up on eBay. he is chopchop on there.

Thanks man

What do i search on ebay

alluneed-scooter-parts/chopchop123
http://stores.ebay.com/alluneed-scooter ... 34.c0.m322

Will tazlands's 48mm piston fit in my stock cylinder if i bore it out?

Also what some other places i can buy big bore kits fo sprees. I saw a video and the guy said he got the from tazland or chopchop123 and he doesnt sell cyliders. What should i do?

Tazland001 and chop chop are the same guy he is a member here on the forum. He is the only seller of the big bore kits for sprees. If he doesnt have any big bore kits on his eBay store he may just be waiting on an order. Taz is a great seller to deal with, he has put a lot into sourcing decent parts. I'm sure if you pmd him he could tell you when he has kits coming

Sent from my Nexus 7 using Tapatalk 2

I'm sure if you bored the stock cylinder out to fit the 48mm piston it would work. You need to go to the manual and get the piston to cylinder clearances to give the machine shop along with the piston so they can measure it and bore with the clearance. Its something like 0.30 or 0.35mm kind of thing, the manual will tell you. Sooo much easier to pick up the kit as a whole though.

Sent from my Nexus 7 using Tapatalk 2

Thank you. How do i pmd him?

Thank you. How do i pmd him?

Click Here --->> ucp.php?i=pm&mode=compose&u=9513

do you want to go faster or have more power .If you wanna go faster what sort of speeds are you looking for?

Will tazlands's 48mm piston fit in my stock cylinder if i bore it out?

Check with tazland001 - IRC stock cylinder walls are too thin when bored to 48mm.

Hi i was woundering what bbbk i should get for my spree. And where to find it