Page 1 of 1
What variator for 1999 elite S
Posted: Tue Jul 16, 2013 10:19 pm
by goreyboggs
Looking to upgrade and gain some speed. Anyone got a recommendation? Looks like they start at $30 and go to $100 or so.
Re: What variator for 1999 elite S
Posted: Wed Jul 17, 2013 12:16 am
by Wheelman-111
Greetings:
Polini or Polini for Ruckus both worth the pain if you have the clams and care to carve. Stock used Ruck vario almost as good. Get the SEF ramp plate unless you buy Polini, which uses its own bespoke design.
Re: What variator for 1999 elite S
Posted: Thu Jul 18, 2013 1:09 pm
by steffen707
Wheelman-111 wrote:Greetings:
Polini or Polini for Ruckus both worth the pain if you have the clams and care to carve. Stock used Ruck vario almost as good. Get the SEF ramp plate unless you buy Polini, which uses its own bespoke design.
you gotta get an SEF ramp plate made for the ruckus though correct? I tried putting my elite SEF on my ruckus and it ddin't fit.
Re: What variator for 1999 elite S
Posted: Thu Jul 18, 2013 4:51 pm
by Wheelman-111
Greetings:
Right, forgot about crank diam difference. Scooterwerx fabricated a washer to press on the 16/Ruck plate once. Polini once did make a small-diameter plate for its Aero/SE products, but may be scarce now. May be hard to get another brand plate to fit Polini casting.
Re: What variator for 1999 elite S
Posted: Thu Jul 18, 2013 9:50 pm
by maddog
Thanx guys, i just picked up the last 5 daytona #2 ramps, i have a rare #6 that was used in my nb 50 aero, i love old school parts
Re: What variator for 1999 elite S
Posted: Thu Jul 18, 2013 10:16 pm
by steffen707
The last 5 in existence? Great Scott, Marty!
Re: What variator for 1999 elite S
Posted: Fri Jul 19, 2013 5:51 pm
by goreyboggs
I really am just looking for a bolt on part. Are the $36 ebay ones any good?
Re: What variator for 1999 elite S
Posted: Fri Jul 19, 2013 7:35 pm
by paulpauly7
im running the cheap koso variator and ramp i think it works great