Scooterswapshop DYNO thread Yasuni C16 pipe~

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

User avatar
DirtyE
Elite
Elite
Posts: 559
Joined: Sun Nov 30, 2014 8:13 pm
Location: Bend, OR

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by DirtyE »

The only setup ive ever run anything more than a dellorto phbg 21mm was my 94cc big evo build. 28mm is a big carb.
98 Elite
4 strokes are for cars
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by LMH »

DirtyE wrote:The only setup ive ever run anything more than a dellorto phbg 21mm was my 94cc big evo build. 28mm is a big carb.
I've been saying this for years.
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by LMH »

They're obviously over compensating for something.
User avatar
Rip_City_Spree
CB900F
CB900F
Posts: 1379
Joined: Sun Jun 13, 2010 7:47 pm

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by Rip_City_Spree »

Not sure how to read that but would like to if you could explain a little about those graphs Id appreciate it. Always wanting to learn
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
User avatar
Downsouthdio
CB900F
CB900F
Posts: 1205
Joined: Wed Dec 21, 2011 11:00 am
Location: Key west

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by Downsouthdio »

Horsepower to rpms on the graph im pretty sure..im curious to see how these pipes are..i have 2 jogs with different setups and using this pipe ,and they both scream and sound so nice
Last edited by Downsouthdio on Mon Dec 22, 2014 8:18 pm, edited 1 time in total.
Honda super dio
Corsa
26mm
Sparrow
User avatar
Rip_City_Spree
CB900F
CB900F
Posts: 1379
Joined: Sun Jun 13, 2010 7:47 pm

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by Rip_City_Spree »

How do you think this pipe would do with a contessa set up?
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
User avatar
Xxbeejay45xx
Elite
Elite
Posts: 420
Joined: Thu Jun 19, 2014 7:13 pm
Location: Kansas

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by Xxbeejay45xx »

So when do you think this will yasuni c16 pipe will be available sir?
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by LMH »

Line me up for one, I just put my order in for the windjammer I'll send you to test out as well.
User avatar
DirtyE
Elite
Elite
Posts: 559
Joined: Sun Nov 30, 2014 8:13 pm
Location: Bend, OR

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by DirtyE »

Do you have the same dyno as rich at HGT?

I dont envy you and the work you're doing. I like trans and carb tuning for a minute, then I tend to get cranky.
98 Elite
4 strokes are for cars
User avatar
DirtyE
Elite
Elite
Posts: 559
Joined: Sun Nov 30, 2014 8:13 pm
Location: Bend, OR

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by DirtyE »

graphite9 wrote:Hgt has a 35hp max scooter dyno. I've got a full size dyno good t. 500hp :) hgt knows his stuff, that guy is my hero. Amazing talent. The tricky part is the cvt.
Rich got a LOT of argumentative feedback from the guys on scooterinvasion. His mina sr50 is the bomb. Hes really big into the ditech and the guys from outside the usa gave him quite a bit of gruff about it. I admire his work,he pays meticulous attention to detail.

Coming from a carbureted background, my first mod on my 09 Sr was to convert to carb.
98 Elite
4 strokes are for cars
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by LMH »

Richs engine is a morini style that was a ditech. He's about 4 miles from my house. He does morini, piaggio, and the mina sr50
Last edited by LMH on Tue Dec 23, 2014 10:51 am, edited 1 time in total.
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by swimmingfree »

hay i know im not the smarts one on here but i dont get a thing out of them.... a little help wood be a big help for me...
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
swimmingfree
CBR1000RR
CBR1000RR
Posts: 3357
Joined: Tue Jun 14, 2011 12:28 pm
Location: mich.

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by swimmingfree »

thank you .... :happy: :happy: :happy:
swimmingfree
handicap (dyslexia)
looking for
se50 crank...

SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
User avatar
DirtyE
Elite
Elite
Posts: 559
Joined: Sun Nov 30, 2014 8:13 pm
Location: Bend, OR

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by DirtyE »

LoveMyHonda wrote:Richs engine is a morini style that was a ditech. He's about 4 miles from my house. He does morini, piaggio, and the mina sr50
Good neighbor to have!
98 Elite
4 strokes are for cars
User avatar
LMH
Board Supporter
Board Supporter
Posts: 2096
Joined: Wed Apr 11, 2012 8:00 pm
Location: usa

Re: Scooterswapshop DYNO thread Yasuni C16 pipe~

Post by LMH »

It's a bump start set up.
Post Reply