Scooterswapshop DYNO thread Yasuni C16 pipe~
Moderator: Moderator
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
The only setup ive ever run anything more than a dellorto phbg 21mm was my 94cc big evo build. 28mm is a big carb.
98 Elite
4 strokes are for cars
4 strokes are for cars
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
I've been saying this for years.DirtyE wrote:The only setup ive ever run anything more than a dellorto phbg 21mm was my 94cc big evo build. 28mm is a big carb.
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
They're obviously over compensating for something.
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
Not sure how to read that but would like to if you could explain a little about those graphs Id appreciate it. Always wanting to learn
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
Horsepower to rpms on the graph im pretty sure..im curious to see how these pipes are..i have 2 jogs with different setups and using this pipe ,and they both scream and sound so nice
Last edited by Downsouthdio on Mon Dec 22, 2014 8:18 pm, edited 1 time in total.
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
How do you think this pipe would do with a contessa set up?
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
So when do you think this will yasuni c16 pipe will be available sir?
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
Line me up for one, I just put my order in for the windjammer I'll send you to test out as well.
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
Do you have the same dyno as rich at HGT?
I dont envy you and the work you're doing. I like trans and carb tuning for a minute, then I tend to get cranky.
I dont envy you and the work you're doing. I like trans and carb tuning for a minute, then I tend to get cranky.
98 Elite
4 strokes are for cars
4 strokes are for cars
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
Rich got a LOT of argumentative feedback from the guys on scooterinvasion. His mina sr50 is the bomb. Hes really big into the ditech and the guys from outside the usa gave him quite a bit of gruff about it. I admire his work,he pays meticulous attention to detail.graphite9 wrote:Hgt has a 35hp max scooter dyno. I've got a full size dyno good t. 500hp hgt knows his stuff, that guy is my hero. Amazing talent. The tricky part is the cvt.
Coming from a carbureted background, my first mod on my 09 Sr was to convert to carb.
98 Elite
4 strokes are for cars
4 strokes are for cars
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
Richs engine is a morini style that was a ditech. He's about 4 miles from my house. He does morini, piaggio, and the mina sr50
Last edited by LMH on Tue Dec 23, 2014 10:51 am, edited 1 time in total.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
hay i know im not the smarts one on here but i dont get a thing out of them.... a little help wood be a big help for me...
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
thank you ....
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
Good neighbor to have!LoveMyHonda wrote:Richs engine is a morini style that was a ditech. He's about 4 miles from my house. He does morini, piaggio, and the mina sr50
98 Elite
4 strokes are for cars
4 strokes are for cars
Re: Scooterswapshop DYNO thread Yasuni C16 pipe~
It's a bump start set up.