Spree bbk issues.
Moderator: Moderator
Re: Spree bbk issues.
NO, using your pump and premixing at the same time will put too much oil in the motor and possibly lean your mixture out even more.
Re: Spree bbk issues.
You guys are still using your cooling shrouds, right?
Re: Spree bbk issues.
Of course . And I put the head on just like it shows in the owners manual.
When sitting on the bike that ledge where the cooling fins stick out is on my right where the.fan is
When sitting on the bike that ledge where the cooling fins stick out is on my right where the.fan is
Re: Spree bbk issues.
I put my head on just like this.....
Or did i mess that up too?
Or did i mess that up too?
- Attachments
-
- 20160704_104638.jpg (100.57 KiB) Viewed 6421 times
Re: Spree bbk issues.
I'm not sure, but that dont look right to me.
Re: Spree bbk issues.
- Attachments
-
- 20160706_140956.jpg (73.31 KiB) Viewed 6413 times
Re: Spree bbk issues.
Bro that's 180 degrees out. Look close.
Re: Spree bbk issues.
What do you mean? I should just flip it completely around right?? Just flip to the opposite side?
Re: Spree bbk issues.
Ya I think that would be right. Compare the exhaust side in the pic and yours. Looks off haha.
- eclark5483
- CB900F
- Posts: 1437
- Joined: Thu Apr 14, 2016 5:15 am
- Location: Spencer Iowa
- Contact:
Re: Spree bbk issues.
That's way off. Looks like your gonna need to tear it down and re-do it.
Re: Spree bbk issues.
Dang. Well that was the culprit. I'm such an idiot
Re: Spree bbk issues.
Hey I've done it too haha. Remember to reseal the head gasket w coppertex
Re: Spree bbk issues.
I followed the Honda Spree Service Manual page 6-10...stop looking at a parts diagram for engine building tips, guys...seriously.
I need to find some new haters...the ones I have are starting to like me.
Re: Spree bbk issues.
But that's how it should.be put.on.... I'll check the owners manual.again and see.
That parts diagram is accurate I think too
That parts diagram is accurate I think too
Re: Spree bbk issues.
Ughh balls really?! I'll have to pull the fan shroud and check mine but am pretty sure it's mounted in the same orientation as jakubmans pic
I seem to remember seeing obvious issues with trying to line up the fan shroud with installing the same way as the parts diagram says... Hella confused now?!?!
I seem to remember seeing obvious issues with trying to line up the fan shroud with installing the same way as the parts diagram says... Hella confused now?!?!