44MM Stroke Dio/AF16/AF18
Moderator: Moderator
44MM Stroke Dio/AF16/AF18
Whats out there?
I've found Jiangwayne, which I don't really like.
and Taida which isn't quite 44 (43.6)
Am I missing any others?
I've found Jiangwayne, which I don't really like.
and Taida which isn't quite 44 (43.6)
Am I missing any others?
Re: 44MM Stroke Dio/AF16/AF18
Athena?
I need to find some new haters...the ones I have are starting to like me.
Re: 44MM Stroke Dio/AF16/AF18
Do you have a listing for it? I haven't came across it in their catalog, only OEM replacement.
Re: 44MM Stroke Dio/AF16/AF18
Stock stroke is 41.4....youre looking for mini-stroker?
I need to find some new haters...the ones I have are starting to like me.
Re: 44MM Stroke Dio/AF16/AF18
Yes. 44mm stroke.
- sum_azn_kid
- Goped
- Posts: 90
- Joined: Sun Sep 24, 2017 7:14 pm
- Location: hawaii
Re: 44MM Stroke Dio/AF16/AF18
https://dynoscooter.com/collections/hon ... -elite-dio
In case u didn't see on the other forum.
In case u didn't see on the other forum.
Super Dio ZX "Ube"
72 corsa
72 corsa
Re: 44MM Stroke Dio/AF16/AF18
There is another forum?sum_azn_kid wrote:https://dynoscooter.com/collections/hon ... -elite-dio
In case u didn't see on the other forum.
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
Re: 44MM Stroke Dio/AF16/AF18
49ccscoot.proboards.com
Re: 44MM Stroke Dio/AF16/AF18
Well I ordered 2 of those 44mm Stroke Dio AF18 CMR from DynoScoot. Never heard of him but he sells a lot on ebay. Ordering the cylinder very soon too. Let the games begin.
Stock rod stroke ratio is 1.93
Most ministroke cranks have a rod stroke ratio of 1.82
Modern high strung streetbikes are 2.0+
My build will be 2.07 with a 91mm connecting rod. Ordered today from a local shop as they had them cheaper than I could find anywhere. ProX 03.1102 Note that the big end is 1.5mm bigger, and will need to be resized (width), or the crank modified. I think the latter so I can use the wider bearing. You could also use a ProX 03.2104 which is 2mm wider on the big end and 1mm shorter @ 90mm and give a rod stroke ratio of 2.05.
Zoom.
Stock rod stroke ratio is 1.93
Most ministroke cranks have a rod stroke ratio of 1.82
Modern high strung streetbikes are 2.0+
My build will be 2.07 with a 91mm connecting rod. Ordered today from a local shop as they had them cheaper than I could find anywhere. ProX 03.1102 Note that the big end is 1.5mm bigger, and will need to be resized (width), or the crank modified. I think the latter so I can use the wider bearing. You could also use a ProX 03.2104 which is 2mm wider on the big end and 1mm shorter @ 90mm and give a rod stroke ratio of 2.05.
Zoom.
Last edited by pitobread on Sat Dec 16, 2017 12:58 am, edited 1 time in total.
- sum_azn_kid
- Goped
- Posts: 90
- Joined: Sun Sep 24, 2017 7:14 pm
- Location: hawaii
Re: 44MM Stroke Dio/AF16/AF18
I've bought from them before. They are good sellers.
Super Dio ZX "Ube"
72 corsa
72 corsa
Re: 44MM Stroke Dio/AF16/AF18
TWH Still makes one as well, sans oil pump drive.
44mm, looks allright
44mm, looks allright
- sum_azn_kid
- Goped
- Posts: 90
- Joined: Sun Sep 24, 2017 7:14 pm
- Location: hawaii
Re: 44MM Stroke Dio/AF16/AF18
Should be here soon. Few more days.
Re: 44MM Stroke Dio/AF16/AF18
Got them today, The cranks are very nice quality, good machining, nice grinding on the bearing journals, nice threads and splines.
The rod is kinda wimpy. It looks like a 2AB rod without the words on it. Im tossing these rods anyway so no matter to me. A fella could throw a Pro-X rod on there and have a stout crank.
The rod is kinda wimpy. It looks like a 2AB rod without the words on it. Im tossing these rods anyway so no matter to me. A fella could throw a Pro-X rod on there and have a stout crank.