NB50 Front tire mod
Moderator: Moderator
- nateberrier
- Spree
- Posts: 164
- Joined: Wed Jul 10, 2019 2:01 pm
- Location: Louisville
NB50 Front tire mod
I grabbed a met front wheel and I have an sa50 brake plate to go along. THey should generally be the same size. I might even have access to another brake plate, so pretty happy about that as I have two aeros.
I know a 2.75 rubs the speedo cable a little. I think I can tie it out of the way though. I was double checking last night. Im wondering if anyone has a 2.75 that can be run tubeless or if there is another size thats about the same. If you all have any tricks to fit a bigger wheel on an aero ill take those suggestions also
I know a 2.75 rubs the speedo cable a little. I think I can tie it out of the way though. I was double checking last night. Im wondering if anyone has a 2.75 that can be run tubeless or if there is another size thats about the same. If you all have any tricks to fit a bigger wheel on an aero ill take those suggestions also
1986 Aero White -- Stock With Keli Var
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
- nateberrier
- Spree
- Posts: 164
- Joined: Wed Jul 10, 2019 2:01 pm
- Location: Louisville
Re: NB50 Front tire mod
Ive heard 80/90 is pretty close to 250-275 or somewhere in between?
1986 Aero White -- Stock With Keli Var
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
Re: NB50 Front tire mod
I suspect the 80/90 is as wide as a 3.00x10 since 25mm = 1 inch and 80 is the width.
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
- harleyracer59
- Elite
- Posts: 327
- Joined: Tue Jun 05, 2018 3:56 pm
- Location: Nickastan ca
Re: NB50 Front tire mod
I have a 3.00x10 tubeless front tire and a 90/90-10 tubeless rear on my blue 84 nb50. it also has an 86+ front forks, aluminum 2.50 wide rims and an elite150 front with 110 diameter brake shoes.
IIRC and 80/90-10 is just about the same width as a 3.00x10, but its a lower profile/ not as tall of a tire
IIRC and 80/90-10 is just about the same width as a 3.00x10, but its a lower profile/ not as tall of a tire
- nateberrier
- Spree
- Posts: 164
- Joined: Wed Jul 10, 2019 2:01 pm
- Location: Louisville
Re: NB50 Front tire mod
Awesome, I'll see if I can get the elite brake plate mocked up and have someone install an 80/90 for me. Not sure if I wanna try mounting on tubeless. Either way met front and rear will be a nice upgrade. It has a 90/90 on it now so might see how bad that rubs
1986 Aero White -- Stock With Keli Var
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: NB50 Front tire mod
Greetings
I ran Met wheels and 90/90s front and rear on my '87 Aero. The centerstand will need modification to clear the back tire, and the front will kiss the fender over curb cuts, but otherwise it's fine.
I ran Met wheels and 90/90s front and rear on my '87 Aero. The centerstand will need modification to clear the back tire, and the front will kiss the fender over curb cuts, but otherwise it's fine.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- harleyracer59
- Elite
- Posts: 327
- Joined: Tue Jun 05, 2018 3:56 pm
- Location: Nickastan ca
Re: NB50 Front tire mod
does an 87 aero look like an 85/86 nb50 aero, or does it look like an 87 ne50 elite? ive never seen an 87 aero here in cali. did your 87 aero have the same special gearing as the 87 elite, or were they just leftover 86 engines & gearing?Wheelman-111 wrote: ↑Mon Sep 02, 2019 2:29 pm Greetings
I ran Met wheels and 90/90s front and rear on my '87 Aero. The centerstand will need modification to clear the back tire, and the front will kiss the fender over curb cuts, but otherwise it's fine.
on my blue 84 it has the 85+ trailing link forks but I sill use the 84 front fender, with the 3.00x10 I have no rubbing at all. ive even taken shocks off and ran struts to lower it with no rubbing. looked real cool, but had to run lower air psi to make it somewhat comfortable to ride.
and nate, my aluminum wheels on blue have bolt on hubs. I don't think you can run the bigger backing plate with the met wheels. but the met has 95mm brakes front and rear correct? that's a huge upgrade over the stock 80mm fronts.
on my orange 84 Im gonna run the 6 spoke dio zx wheels. except im not running the disc front. I just purchased a matching kitaco drum front wheel. I wonder what size brakes that uses. ill have to measure it today. I might need to find a compatible backing plate for it. anyone know what 95mm backing plate will work on the 84 leading link forks?
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: NB50 Front tire mod
Greetings:
'85 had the 2-bolt intake and no kickstarter, but otherwise the same as '86 and '87. Gearing was 11:1, like the earlier Aeros. Coveted '87 Elite S 10:1s are very hard to find.
'85 had the 2-bolt intake and no kickstarter, but otherwise the same as '86 and '87. Gearing was 11:1, like the earlier Aeros. Coveted '87 Elite S 10:1s are very hard to find.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- nateberrier
- Spree
- Posts: 164
- Joined: Wed Jul 10, 2019 2:01 pm
- Location: Louisville
Re: NB50 Front tire mod
pretty sure you can use the 94+ elite brake plate on the front and use a met wheel, ive seen several posts about it in the past
1986 Aero White -- Stock With Keli Var
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
- nateberrier
- Spree
- Posts: 164
- Joined: Wed Jul 10, 2019 2:01 pm
- Location: Louisville
Re: NB50 Front tire mod
Just a quick update for anyone who comes after, I've been running a met wheel with 90/90 for a while and haven't had ant issue. You'll need an Sa50 brake panel
1986 Aero White -- Stock With Keli Var
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank
1985 Aero Red -- Af05 Malossi BBK + Keli Var
1985 Aero Red -- Af16 Corsa / Fabrizi Pipe / Polini 24 PWK / Athena Stuffer Crank