Stock 72 malossi

Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.

Moderator: Moderator

Post Reply
Kolohe816
Noob
Noob
Posts: 3
Joined: Sun May 15, 2022 3:47 pm

Stock 72 malossi

Post by Kolohe816 »

I need help tuning my stock 72cc any suggestions
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: Stock 72 malossi

Post by Meatball »

First you must realize 72cc is not stock.

Besides that, some more information like what scooter, what motor and what other components youve added other than the Malossi.
I need to find some new haters...the ones I have are starting to like me.
Kolohe816
Noob
Noob
Posts: 3
Joined: Sun May 15, 2022 3:47 pm

Re: Stock 72 malossi

Post by Kolohe816 »

Hahaha what I meant was by stock 72 is I'm running a 72 malossi with a stock carburetor
Kolohe816
Noob
Noob
Posts: 3
Joined: Sun May 15, 2022 3:47 pm

Re: Stock 72 malossi

Post by Kolohe816 »

Af16e with yellow center spring yellow clutch spring,
The main jet has a 68 in it 10.1 gears
User avatar
Meatball
CB900F
CB900F
Posts: 2320
Joined: Sat Jun 04, 2016 10:45 am
Location: seattle

Re: Stock 72 malossi

Post by Meatball »

Use a mix of 32:1. Get a CHT gauge and start with 85 mj. If it still runs hot try 90. You are held back to go bigger by carb, intake, filter box, exhaust, etc… and the 72 is getting choked out. Probably needs 105-115 mj but it’ll rich bog unless she can breathe. Best you can do is fatten the mj to the point of bog, back it off a bit and hope its ridable.

Look for a crusing temp around 350-370
370-380 when youre rippin it or hill climbs
390 danger-stop
400 walking
I need to find some new haters...the ones I have are starting to like me.
Post Reply