Does your Spree/Elite already run great, and you're trying to make it quicker/faster? Need a monster motor swap? Discuss your ideas here.
Moderator: Moderator
warmonkey
Noob
Posts: 9 Joined: Sat Jul 28, 2007 7:22 pm
Location: indiana
Post
by warmonkey » Fri Aug 03, 2007 5:52 pm
ok i get my head piston and rinand tommarow. they told me it was going to be 50 over. will this give me a big differance in power and speed and how much cc would that putt me up to.
warmonkey
Noob
Posts: 9 Joined: Sat Jul 28, 2007 7:22 pm
Location: indiana
Post
by warmonkey » Fri Aug 03, 2007 5:54 pm
oops my spelling sucks
warmonkey
Noob
Posts: 9 Joined: Sat Jul 28, 2007 7:22 pm
Location: indiana
Post
by warmonkey » Fri Aug 03, 2007 5:55 pm
o-ya i have a 94 honda elite with a sa50
Kenny_McCormic
CBR1000RR
Posts: 4957 Joined: Sun Apr 16, 2006 11:51 am
Location: Southern Michigan
Post
by Kenny_McCormic » Fri Aug 03, 2007 8:03 pm
use the edit button man. shouldnt give you much power people usually overbore to reuse a worn out stock bore.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
stillspeeding
Spree
Posts: 279 Joined: Fri May 04, 2007 3:50 am
Location: u.s.a
Post
by stillspeeding » Thu Aug 16, 2007 7:08 pm
you mean .050 over on a stock bore, you will gain compression & torque but no real speed!
Can't afford speed then stay away from it!