dio stroker?

diomike · Post by **diomike** » Sun Aug 26, 2007 12:28 pm

i got a dio with
70cc athena
killi pully kit
8-1 gear ratio
tecnic gas pipe
crome manifold
28m carb
1500 cent spring
yellow cluch sprig

i was wondering wat kind of stroker i can get that will work with my config?? are they all warter cooled??? wat sizes are there?and do u got to get a case spliter to change ur crank shaft?

stillspeeding · Post by **stillspeeding** » Wed Aug 29, 2007 5:26 am

42-43- or 44.4 cranks are known as mini strokers, you can also do a japan rear pulley conversion but don't the michigan boys

they are very slow these days

diomike · Post by **diomike** » Wed Aug 29, 2007 4:05 pm

rear pully are u talking about useing the zx part??

stillspeeding · Post by **stillspeeding** » Fri Aug 31, 2007 2:12 am

Yea, vt sells them for $65, mount it first with the belt and shave the 3 high spots with a dremmel or air tool grinder and you will gain an easy 5 mph

stillspeeding · Post by **stillspeeding** » Thu Sep 06, 2007 4:09 am

So you boyz don't know about that conversion

makes me know my engines! Ha! ha!

diomike · Post by **diomike** » Thu Sep 06, 2007 12:57 pm

wat convertoin are u talking are u gonna tells us or keep it to urself

Dac · Post by **Dac** » Thu Sep 06, 2007 8:42 pm

he talks 98% s***, dont try to understand him

diomike · Post by **diomike** » Fri Sep 07, 2007 7:14 pm

ive only heard of thye zx convertion

stillspeeding · Post by **stillspeeding** » Fri Sep 07, 2007 9:36 pm

The zx rear pulley is only for the 94 and up sa-50 elites, it replaces the stock 2 pin pulley with a 3 pin and is 1mm taller thats why the inner trans high spots need to be shaved which takes about 10 mins, its a Taiwan pulley thats why its cheap! try it you may like it

Dac · Post by **Dac** » Fri Sep 07, 2007 9:54 pm

how much does it help? or is it just one of those " i got a ----" type things, like after market reed valves.

veedubh20 · Post by **veedubh20** » Sat Sep 08, 2007 2:30 am

jog70cc can spank dio stroker motor anytime

diomike · Post by **diomike** » Sat Sep 08, 2007 4:54 pm

i dont now about that

Dac · Post by **Dac** » Sat Sep 08, 2007 4:59 pm

jogs are fast but dio's can Fly.

tru72 · Post by **tru72** » Sat Sep 08, 2007 5:55 pm

actually Dac you are incorrect about jogs. LOL as much as i hate to admit it, the jog/minarelli motor set up is way more efficient working than a dio motor "chokes" cough , cough! hahah I have seen this play out many times. I know that a 72cc set up built on both motors ,perfectly tuned, jog wins. Dio motors are more preferred in the states... other places around the world are more jog. I hate the sound of that...
I prefer my dio stuff, but if i could find a good jog in good condition, i would defiantly build that too! Its all your personal preference!
just have fun!
aloha
D
ps listen to veedub, he knows his jogs!

diomike · Post by **diomike** » Sun Sep 09, 2007 1:37 am

i find that after owning a dio they tend to be unstable. my dio ran for a 3 weeks straight and now i cant get it to turn over. i cant figure the problem out