Taking apart a carb. High Rez. Picture By Picture.

The home of the FAQs and all the things you need to know to fix your Spree / Elite, outside the service manuals

Moderator: FAQ Moderator

Post Reply
User avatar
Dac
Veteran OG
Veteran OG
Posts: 3342
Joined: Sat May 05, 2007 5:58 pm
Location: SouthWest Michigan
Contact:

Taking apart a carb. High Rez. Picture By Picture.

Post by Dac »

Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Note- The next few pictures i remove a tube.
A lot of people don't even bother with this tube. I really don't know how important it is.
The way i do it is frowned upon because i use metal. Many people have said this is bad.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
At this point in time, take a can of carb cleaner and spray down everything.
Spray out all the tubes and holes. And make sure everything is clean.
Now take compressed air and blow it all out.
Image
Image
Now, Time to put it back together.
Image
Wait till set the idle screw (top one) till you put the carb back on the bike.
With the second screw, you need to screw it in till its tight, then back it out 1 full rotation , Then 7/8ths more.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
Post Reply