mopeds(not) you ride (pics please)
Moderator: Moderator
- Spreedemon
- Noob
- Posts: 12
- Joined: Sat Sep 11, 2010 7:03 pm
- Location: Salem, Oregon
- Contact:
Re: mopeds you ride (pics please)
This is an 86' Spree I just got last week... had the flames on the seat already. I thought I'd flame the rest of it Still have a few pieces to finish
- Attachments
-
- My photos011.jpg (29.09 KiB) Viewed 13932 times
-
- My photos006.jpg (32.58 KiB) Viewed 13932 times
Last edited by Spreedemon on Thu Sep 16, 2010 11:54 pm, edited 3 times in total.
1986 Spree
- Spreedemon
- Noob
- Posts: 12
- Joined: Sat Sep 11, 2010 7:03 pm
- Location: Salem, Oregon
- Contact:
Re: mopeds you ride (pics please)
Oregon law is a lot like Michigan... reads about the same. A Spree is considered a Moped even though it doesn't have pedals. Less than 50cc, 2-3 wheels, no more than 30 mph... and must be registered, titled, and insured and carries a Moped plate. So, though I usually call mine a scooter, it IS considered a Moped in Oregon.
Last edited by Spreedemon on Thu Sep 16, 2010 11:57 pm, edited 1 time in total.
1986 Spree
Re: mopeds you ride (pics please)
70 cc and 50mph fockin nuurrrrrmmm
- Attachments
-
- 090820101838.jpg (31.67 KiB) Viewed 13972 times
drive her like your late for mass !
Re: mopeds you ride (pics please)
1985 Spree, stock except for 2.75X10 tires. Have a BBK, Taz's gears, SB50 carb, intake and carbon fiber reeds for it.
1983 Aero 80, stock except for a manual bystarter in place of the vacuum/heat controlled one. Have a Aero 125 carb, intake and reeds for it.
Got this Aero 125 running, stock to start with. But have a CT intake and reeds for it.
Aero 50, stock except for ignition switch.
Have a second Aero 80 which need a lot of work and it is last in line.
1983 Aero 80, stock except for a manual bystarter in place of the vacuum/heat controlled one. Have a Aero 125 carb, intake and reeds for it.
Got this Aero 125 running, stock to start with. But have a CT intake and reeds for it.
Aero 50, stock except for ignition switch.
Have a second Aero 80 which need a lot of work and it is last in line.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Noob
- Posts: 12
- Joined: Thu Dec 16, 2010 1:15 am
Re: mopeds you ride (pics please)
Yo bear what are the advantage of carbon fiber reeds? sorry if im asking dumb stuff im a total noob to mopeds. Im a car and computer nerd but not really up to par on moped Knowledge. I really want to learn all i can though.
Re: mopeds you ride (pics please)
charlie047 wrote:Yo bear what are the advantage of carbon fiber reeds? sorry if im asking dumb stuff im a total noob to mopeds. Im a car and computer nerd but not really up to par on moped Knowledge. I really want to learn all i can though.
Carbon fiber reeds open and close faster, open farther, which increases air flow, thus making more power and most important, when they break, they do NOT hurt the motor as they go thru it and out the exhaust.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Noob
- Posts: 12
- Joined: Thu Dec 16, 2010 1:15 am
Re: mopeds you ride (pics please)
killer where can i get them?
Re: mopeds you ride (pics please)
charlie047 wrote:killer where can i get them?
Boyesen makes reeds but not for everything. I know they make them for the Aero 80 and the SA50 motors. However you can make then yourself as sheets of carbon fiber are available. Wheelman has made some. Treatlands sells the sheets, here are a couple of examples:
http://www.treatland.tv/polini-sheet-0- ... 0.30mm.htm
http://www.treatland.tv/polini-green-sh ... 0.35mm.htm
http://www.treatland.tv/polini-red-shee ... 0.45mm.htm
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: mopeds you ride (pics please)
Greetings:
Because of their faster response, the micro-puffs of mixture inhaled under engine vacuum can be more precisely controlled with faster carbon reeds. You should know you may need to re-jet when you swap to reeds with different properties, including different thicknesses of that Polini stuff.
Because of their faster response, the micro-puffs of mixture inhaled under engine vacuum can be more precisely controlled with faster carbon reeds. You should know you may need to re-jet when you swap to reeds with different properties, including different thicknesses of that Polini stuff.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: mopeds you ride (pics please)
at friends house working on it at the moment
Graphics Artist Vfx Car Collision
Re: mopeds you ride (pics please)
'80 Express
- Attachments
-
- DSC00252.JPG (164.03 KiB) Viewed 13765 times
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
- Evil Kitty
- Noob
- Posts: 9
- Joined: Thu Feb 24, 2011 7:26 am
- Location: Rotterdam, Holland
Re: mopeds you ride (pics please)
Never drive faster than your guardian angel can fly!
Re: mopeds you ride (pics please)
my 08 zuma and my truck
- Attachments
-
- DSC01868.JPG (139.14 KiB) Viewed 13710 times
MICHIGAN MOPED MAFIA Co Founder VET OG. 95 YAMAHA JOG 70CC
Re: mopeds you ride (pics please)
2000 Honda Elite S
- Attachments
-
- 2.jpg (62.53 KiB) Viewed 13689 times
'00 Honda Elite S.....................'06 Yamaha Zuma
-80cc Taiwanese BBK...............-Taiwan pwr pkg
-Malossi Vari
-6.9:1 Primary gears
-High Energy Ignition Coil
-Carbon Fiber Reeds
-Chrome CT Mani
-28mm OKO Carb
-Uni Pod Filter
-PG Long pipe
-80cc Taiwanese BBK...............-Taiwan pwr pkg
-Malossi Vari
-6.9:1 Primary gears
-High Energy Ignition Coil
-Carbon Fiber Reeds
-Chrome CT Mani
-28mm OKO Carb
-Uni Pod Filter
-PG Long pipe
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: mopeds you ride (pics please)
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts