Got a FA50 today
Moderator: Moderator
Got a FA50 today
Like it says, got a 82 Suzuki FA50 today. Always wanted one of these types, got one with a title. I'm tearing it down to clean and rebuild carb then we'll see what's what. Any performance parts?
I am a leaf on the wind. Watch how I soar.
Re: Got a FA50 today
if there's any performance parts, they can be found at www.treatland.tv
Re: Got a FA50 today
the only performance part is a muffler, i wondered if i could get a minrelli motor to go in mine. good find there zup. mine is an 83 turn signals and horn dont work and its hard to start at times. batteries are expensive. i bought mine for 10.00 then they jacked the price up to 130.00.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
Re: Got a FA50 today
Yeah, I paid two bens for it, but it is complete, minus a few things I'm finding tearing into it today.
1. Air filter.
2. Kickstart spring.
3. Tail light is broke.
4. Rear reflector broke.
5. Muffler has been welded back on pipe with a brace for good measure.
6. Rear wheel has a couple broken spokes and they seem to be pulling the holes in the hub.
7. Rear tire is bald.
Also missing is the leg shield, Rats!! I know its an optional thing, but I think it adds character.
The pipe is not available at this moment. I have the battery, but it may not be okay. I'm going to add some acid to it and see if it charges.
The guy said it ran last year and can't get it to run this year. I took the pipe off and no wonder, I poured out about a pint of oil on the garage floor.
I should have this thing running when I get the parts I'm ordering today. (two weeks to get them).
1. Air filter.
2. Kickstart spring.
3. Tail light is broke.
4. Rear reflector broke.
5. Muffler has been welded back on pipe with a brace for good measure.
6. Rear wheel has a couple broken spokes and they seem to be pulling the holes in the hub.
7. Rear tire is bald.
Also missing is the leg shield, Rats!! I know its an optional thing, but I think it adds character.
The pipe is not available at this moment. I have the battery, but it may not be okay. I'm going to add some acid to it and see if it charges.
The guy said it ran last year and can't get it to run this year. I took the pipe off and no wonder, I poured out about a pint of oil on the garage floor.
I should have this thing running when I get the parts I'm ordering today. (two weeks to get them).
I am a leaf on the wind. Watch how I soar.
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Got a FA50 today
Very cool express like
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: Got a FA50 today
that battery is a 6 V battery if ya didnt know. ALOW1 has some parts maybe, ask him if he does, i got a turn relay from him but it didnt solve my problem.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
Re: Got a FA50 today
I'm pretty sure most parts are still available from Suzuki.
I am a leaf on the wind. Watch how I soar.
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: Got a FA50 today
'Another scooter deal?'
Dac posted some pics of an extreme Suzuki makeover. Along with lot of other mods, it looks nothing like a FA50. Guy cut the case and welded in a different rear to get it variated.
http://www.hondaspree.net/phpBB3/viewto ... a50#p86585
Dac posted some pics of an extreme Suzuki makeover. Along with lot of other mods, it looks nothing like a FA50. Guy cut the case and welded in a different rear to get it variated.
http://www.hondaspree.net/phpBB3/viewto ... a50#p86585
Re: Got a FA50 today
Not too sure it's a deal anymore. The carb is going to need a VERY thorough cleaning. all the passages are closed, like he got water in there from the fuel left in over the winter.
I'll work it out, I always do. But I hate cleaning carbs.
I'll work it out, I always do. But I hate cleaning carbs.
I am a leaf on the wind. Watch how I soar.
Re: Got a FA50 today
Okay, cleaned the carb, got it mostly back together, gonna get new fuel and oil lines then try it out. I found the performance pipe that treatland has out of stock on a different site. If I got this pipe, is there any other mods I need to do in conjunction with this? I still need a tail light lens since mine is completely broken, not to say it is also in the garbage can.
I am a leaf on the wind. Watch how I soar.
Re: Got a FA50 today
my lens was completly gone as im no tail light at all, i went to wally world picked me up one of those replacement lites for a trailer and then ordered a 6v lite from the shop, did the same with my turn signals as they were not there either.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Got a FA50 today
Yeah, you could use just about anything on that check this out cheap too. http://www.treatland.tv/ProductDetails. ... t&CartID=1
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: Got a FA50 today
Noticed on Moped Army a member mentioned that a Spree cylinder and piston will fit the FA50. True?
I am a leaf on the wind. Watch how I soar.