Clicking noise coming from engine
Moderator: Moderator
Clicking noise coming from engine
I just recently installed a polini contessa in my dd50 and it started making a clicking noise from the engine area. Has anyone come across this problem before?
SYM DD50 w/AF16
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor
Re: Clicking noise coming from engine
Raymz808 wrote:I just recently installed a polini contessa and it started making a clicking noise from the engine area. Has anyone come across this problem before?
...only the ones that goofed something.....bummer for ya
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
Re: Clicking noise coming from engine
Yeah bummers! Got around 200+ miles on the bore then clicking started. Just trying to find out if it could be the rings or something really serious. Runs great except for the clicking.
SYM DD50 w/AF16
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Clicking noise coming from engine
remove the head and look for damage
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Clicking noise coming from engine
I took the head and cylinder off and everything looks good. Piston looks to be in really good shape too.
SYM DD50 w/AF16
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Clicking noise coming from engine
do a compression test it should tell if it in good shape..
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Clicking noise coming from engine
That is the next thing I was planning to do. I'll also put in a new wrist pin bearing just to see if that helps. Thanks for the reply!
SYM DD50 w/AF16
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor
Malossi MHR 72CC
PG Long, YMS V8
21mm OKO
CT Chrome
Keli pulley
SEF ramp
Polini 3G Adjustable Clutch
8 to 1 gearing
TT Vapor