sym dd50 with af16e engine?
Moderator: Moderator
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
sym dd50 with af16e engine?
i have a sym dd50 i exchange it with a honda elite engine( af16) on the fuel pump of sym dd 50 one hose is connected to the carb and one is near/under the oil pump/injector of sym dd50 but on the af16 engine there is no nipple to put on on that other hose,i don't know what to do. what will i do on the extra hose of the fuel pump pls help
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: sym dd50 with af16e engine?
What was wrong with the sym motor? You need to re-tap you manifold for vaccum
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
there is nothing wrong w/ the sym motor ,what do you mean re-tap manifold vaccum
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
how do i do that
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: sym dd50 with af16e engine?
Like this,if you are running a fuel pump ,you need to tap your manifold,like you see
On the picture
On the picture
- Attachments
-
- image.jpg (207.88 KiB) Viewed 8954 times
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
i have that on my ct manifold but its not located there on the picture its located at the top can i put tap it there?
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: sym dd50 with af16e engine?
Ok,no if you are running a pump,it needs to be where you see it in the pic
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
Ok so what will I do on the top nipple close it?or leave as it is.
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
Thank you sir...
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
thanks g9
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
do have any idea what size of nipple port and where to buy it thank you..
Re: sym dd50 with af16e engine?
Jealous of your reed cageDownsouthdio wrote:Like this,if you are running a fuel pump ,you need to tap your manifold,like you see
On the picture
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
Re: sym dd50 with af16e engine?
I would get something similar to the size on your pump?chamisataza wrote:do have any idea what size of nipple port and where to buy it thank you..
You can get these brass Barb fittings at any hardware store in the plumbing side. You will also need to get a NPT tap for whatever size you end up going with.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
- chamisataza
- Goped
- Posts: 58
- Joined: Mon Nov 10, 2014 7:45 pm
- Location: virginia
Re: sym dd50 with af16e engine?
thanks j248 ill go to lowes