Page 1 of 1
Gas Typeishh Question
Posted: Sun Mar 15, 2009 7:38 pm
by hollister_boy
Im having problems with my gas gauge on my new scooter.
Can come one tell me where to check the connections?
It never shows it fully filled only about 25% full.
thanks
Posted: Sun Mar 15, 2009 10:17 pm
by burnt_toast
chinese scooter?
common problem I've seen is float that is attached to gas sender gets stuck inside the tank and can't move, not giving you an accurate reading.
get to the gas tank and remove the fuel sender, then place back in but at a different angle, should do the trick if its a brand new scoot
thanks.
Posted: Wed Mar 18, 2009 10:45 pm
by hollister_boy
i will try when i get back home.
Oh..
Posted: Wed Mar 18, 2009 10:49 pm
by hollister_boy
And by the way...Yeah its a Chinese scooter,
Preatty nice.
Having no problems with it so far except for the fuel thing.
its a Wildfire 50cc 2008.
Solved
Posted: Mon Apr 20, 2009 11:54 pm
by hollister_boy
Yeah i solved it a while ago but am just now posting.
The gas float is attached to a metal bar,
then the metal bar is attached to a reader/sensor (whatever)
So.. where the metal float bar connects to the sensor, the weird and odd
Chinese ..thing was to tight, to i pryed and bent it a bit then retightened,
Problem solved.
Works great.