spree 44mm big bore kit
Moderator: Moderator
spree 44mm big bore kit
I'm inpatient and can't wait. I emailed tazland001 for this info but he is offline. I don't have his instructions for the big bore kit handy and i'm ready to start putting my spree back together. I'm not sure if the piston rings are identical, if they have a top and bottom and if there is a marking on the piston that is supposed to point to the exhaust or intake?? Can someone post his installation instructions? Do I use the factory head bolt torque specs?
Re: spree 44mm big bore kit
yes,yes,and yes, the rings are the same no top or bottom,use the factory head bolt torque specs 7-9 ft lbs, and the ex on top of the piston points to the exhaust port.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
Re: spree 44mm big bore kit
thanks
so to confirm
things rings can go on either slot on the piston AND they aren't beveled one way or another so there is no top or bottom to each ring?
so to confirm
things rings can go on either slot on the piston AND they aren't beveled one way or another so there is no top or bottom to each ring?
Re: spree 44mm big bore kit
no top or bottom or bevel. just make sure you get them in the correct placement you know with the open groove lined up with the little tit.
1986 honda spree(silver fox)
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50
BBK
85 head
SB50 intake
SB50 reeds
taz gears
2.75X10 tires
2000 honda elite S
prodigy vari
2k grabber clutch springs
9:1 gears
jdm tail lite
1982 suzuki FA50