Since I don't actually own a Spree (yet
![naughty :naughty:](./images/smilies/icon_eyebrows.gif)
Thanks
Moderator: Moderator
Good Question. I only have one Spree and haven't had a problem with that, but did lose the Radiator Coolant tank cover on my Helix. It was a windy Spring day and some how wind popped it out. Went back and looked but never found it.Fishman43 wrote:As I start in on the process of making replacement Spree petcock covers, can anyone suggest improvements to keep them in place better so they don't pop off?
Since I don't actually own a Spree (yet), photos would be help.
I did the same thing, except I had an 1/8" rubber washer of a large enough diameter to retain the cover. The scooter is in my lower shop and I d*** well am not goin' out in the rain to take a picture. Any washer would work but the rubber one does not scar anything up and it has worked since 1985 as I still have the original cover.odinxxix wrote:think if you could mold in a tab that is strong enuff to withstane that jolt of the bumps that would do it. but this is what i use
Plasti-dip.odinxxix wrote:think if you could mold in a tab that is strong enuff to withstane that jolt of the bumps that would do it. but this is what i use