44mm or 48mm BBK
Moderator: Moderator
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: 44mm or 48mm BBK
do and dio swap if you want speed if not rebuild stock or with the 44mmkit........
Re: 44mm or 48mm BBK
Fastplastic, Why do you recommend the 44mm and not the 48?
Re: 44mm or 48mm BBK
thats whay i was thinking but i didnt want to cause an uproaring ..lol
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: 44mm or 48mm BBK
I agree. Unless you are gonna do a bigger carb and an exhaust, stick with the 44mm BBK and gears.spewya wrote:thats whay i was thinking but i didnt want to cause an uproaring ..lol
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: 44mm or 48mm BBK
I have no interest in increasing speed, just need a little more power to pull my butt up the hills of NH during the beer runs to the corner store. I think the 44mm is probably the best option for me.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 44mm or 48mm BBK
Less tuning issues with the 44 vs th 48thistleb wrote:Fastplastic, Why do you recommend the 44mm and not the 48?
The 48 vibrates alot more than the 44
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: 44mm or 48mm BBK
my 44mm kit was amazing i had two buddys that had the 48's with stock carbs and pipes and they where horrible one blew up other was a pain to tune so bad in which he sold it and went and bought an elite.....
Re: 44mm or 48mm BBK
yeah i wasnt planning on getting a bigger carb but i was gona port the intake and try and make a tuned pipe with the hp raz exaust i have .. would that be a good match up with the 44 and gears
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: 44mm or 48mm BBK
what are you lookin to do with it?spewya wrote:yeah i wasnt planning on getting a bigger carb but i was gona port the intake and try and make a tuned pipe with the hp raz exaust i have .. would that be a good match up with the 44 and gears
Re: 44mm or 48mm BBK
what am i looking to do to what???fastplastic wrote:what are you lookin to do with it?spewya wrote:yeah i wasnt planning on getting a bigger carb but i was gona port the intake and try and make a tuned pipe with the hp raz exaust i have .. would that be a good match up with the 44 and gears
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
Re: 44mm or 48mm BBK
he wants to know how you are gonna be riding your spree and what you want to see performance wise from it
1985 aero 50
ported
custom exhaust
ruckus vario
1K polini clutch springs
hopefully nh80 powered soon!
ported
custom exhaust
ruckus vario
1K polini clutch springs
hopefully nh80 powered soon!
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: 44mm or 48mm BBK
Thank youbc117 wrote:he wants to know how you are gonna be riding your spree and what you want to see performance wise from it
Re: 44mm or 48mm BBK
im gona be riding on flat ground , performance wise i want some speed and acceleration .. as much as i can get with not a big budget
spree parts for sale
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
still learning alot ..thanks to all on this fourm
if you have a good spree jug ..pm me if you want to sell it
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: 44mm or 48mm BBK
well 44mm and gears would be best bet should be able to get a solid 38mph... with hill climming power you need anything more is just a waste of time and money on the nq50
- tazland001
- Board Supporter
- Posts: 1333
- Joined: Thu Apr 30, 2009 11:46 pm
Re: 44mm or 48mm BBK
The 48mm kit is stronger in my opinion than the 44mm.
Hey fast did your friends break in those kits? If they did not then thats what happens. If the kits are not broke in they will soft seize up to 3 times and then goodbye compression. I am not aware of any new BB kits that you can wot right out of the box. And dont worry fast I wont stop until the spree hits 50mph. We all know how you just tell everyone to swap in a dio engine. lol.
Taz
Hey fast did your friends break in those kits? If they did not then thats what happens. If the kits are not broke in they will soft seize up to 3 times and then goodbye compression. I am not aware of any new BB kits that you can wot right out of the box. And dont worry fast I wont stop until the spree hits 50mph. We all know how you just tell everyone to swap in a dio engine. lol.
Taz