The scooter in question is a 1989 elite e sb50p
So far i have put in a 48mm bbk and am working on breaking it in. I have the gears for it too but have yet to get them shaved down and install them. My plans were to do a little more in there while i was at it to try to squeeze a little more out of my scoot!
I have read alot on here about roller weights... i feel like i have a pretty good handle on what they are and their purpose. I figured my scooter has nearly 4k miles on it and they are pretty d*** near warn out. While i was installing the new gears i thought i would swap the old weights for some new ones... possibly ones that would help my top end. Also figured my belt is prolly pretty worn so better replace that too! I read that goin form a 15mm to a 17mm belt will also help.
So scooter gods please help me!!
![worship :worship:](./images/smilies/icon_worship.gif)
1) a link to a thread on how to do the gear swap, pulley mod/ roller weights
2) what kind of weights would be suitable for my application?
3) is the belt thing a good idea? if not what belt should i get???
Thanks in advance! if theres anything im missing please let me know!!!