Bogging down/ cutting out?
Moderator: Moderator
Bogging down/ cutting out?
My spree keeps wanting to die if I full throttle it after starting, and bogs down if I hit bumps, or any impurities in the road? I know that when an engine is 'cold' you can't give it the full beans, depending on the engine, but this just started today (the dying from revving that is) However the bogging down has always been an issue, now its just a lot worse. This annoys me deeply, I haven't had time to check the sparkplug, but I am not sure if that is the problem. Thanks for any help!
Re: Bogging down/ cutting out?
Float level to high or to low or something loose that when you hit the bump creates an air leak.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: Bogging down/ cutting out?
check to see if the plug wire came loose or the wire that goes to the coil. most likely it will be the plug wire cap thats loose and worn.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: Bogging down/ cutting out?
Airleak
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: Bogging down/ cutting out?
An airleak... where? I know the seal for the crank case doesn't exist..
Re: Bogging down/ cutting out?
How the * are we suppose to know. You have the scooter in front of you, you find it.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: Bogging down/ cutting out?
d*** bro, chill yourself. Just asking a question.
I noticed people on this forum do a great job at being * towards simple questions.
I noticed people on this forum do a great job at being * towards simple questions.
Re: Bogging down/ cutting out?
Not simple questions, but stupid questions get treated as stupid.adios1344 wrote:d*** bro, chill yourself. Just asking a question.
I noticed people on this forum do a great job at being * towards simple questions.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: Bogging down/ cutting out?
Isn't the point of this place to ask questions? I believe that's what I was doing, stupid question or not.
Re: Bogging down/ cutting out?
How in the * am I or anyone else on here suppose to know where your vacuum leak is? We do not have the engine in front of us, you do, so ask a question that makes sense and is not just stupid. Why not get off your * and do some checking yourself, it is your engine.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: Bogging down/ cutting out?
No way? I have an engine? Holy s***! I haven't had time to look for a leak. I have been busy with that * * wiring. Perhaps you could have said areas where leaks could have been. I have already mentioned I am a newb at this s***...
Re: Bogging down/ cutting out?
Isn't it obvious where to start? The intake system from the carb to the crankcase. If it isn't there it could be crankshaft seals or a leak between the crankcase halves.adios1344 wrote:No way? I have an engine? Holy s***! I haven't had time to look for a leak. I have been busy with that * * wiring. Perhaps you could have said areas where leaks could have been. I have already mentioned I am a newb at this s***...
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: Bogging down/ cutting out?
No it wasn't obvious where to start, hence why I asked. Thank you for finally telling me where to look however.
-
- BMX
- Posts: 21
- Joined: Wed Jun 08, 2011 2:01 pm
- Location: moville iowa
Re: Bogging down/ cutting out?
eaassssyy buddy, but yes, it sounds like it could be either loose wire or spark plug wire, or an airleak.Bear45-70 wrote:How the * are we suppose to know. You have the scooter in front of you, you find it.
i ride so fast that my scooter flies into the sky and i rain chocolate on the little children.
Re: Bogging down/ cutting out?
Yeah I will check those things out in the morning. Hopefully I find and fix the problem