.....it's a flamin' Aero....
Moderator: Moderator
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: .....it's a flamin' Aero....
Greetings:
Grrrr, I'm jealous. Whaddya need that thing for anyway?! It's missing a back wheel!
Sinceriously good score, Dawg! You and The Bear can blaze the trail to eighth-liter 2-Smoke performance.
In another thread, I suggested a mild 125cc ENDURO pipe might be a good match for Scooter Duty. Bear misinterpreted that to mean a CR pipe, but I was thinking more MT-125. Yeah, it'll need some cuttin' an'-a-weldin' but the volume and geometry's been tried and tested.
Anyhow, Piped or not, should be a spacious fun ride.
Grrrr, I'm jealous. Whaddya need that thing for anyway?! It's missing a back wheel!
Sinceriously good score, Dawg! You and The Bear can blaze the trail to eighth-liter 2-Smoke performance.
In another thread, I suggested a mild 125cc ENDURO pipe might be a good match for Scooter Duty. Bear misinterpreted that to mean a CR pipe, but I was thinking more MT-125. Yeah, it'll need some cuttin' an'-a-weldin' but the volume and geometry's been tried and tested.
Anyhow, Piped or not, should be a spacious fun ride.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- martynkim
- Board Supporter
- Posts: 2899
- Joined: Tue Jan 05, 2010 10:22 pm
- Location: Tacoma, Washington
Re: .....it's a flamin' Aero....
bradthreee wrote:Jealous!!!
Some Carnuba wax, Mother's back to black, and some elbow gease is all you need to make her look like new again
Don't forget Krylon Clear on faded red and Black plastics. Works wonders lasts for a few years.
Need parts? Parting out Spree Aero and Elite!
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
What people share about buying from me http://www.hondaspree.net/phpBB3/viewto ... =1&t=15559
PM me with your needs Cheap Parts
Re: .....it's a flamin' Aero....
If you use the Aero 80 switch assembly, it replaces the the Aero 125 switch assembly and has the brake lever attached. The cable routes just like you would on any other scooter. Down the stem, back along and under the floor board to the rear brake assembly. I have this done to two of my 125's. The switch assembly is a plug in deal. The cable came from a GY6 150cc scooter, 175 cm IIRC.motormike wrote:.....My expectation is to find that the main jet is somewhat reduced by varnish and will clean up and return to normal.....What is the result if I move the main jet needle up a notch??......I have already inspected the handlebars for room to hang a brake-lever perch, but routing the cable gave me visions of wrestling an octopus.....thanx for saying that you have done this....at least I know it is possible.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: .....it's a flamin' Aero....
....acknowledged Bear....thanx for giving up the info......STILL WONDERING...."what is result when moving the main jet needle up a notch ?".............
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
Re: .....it's a flamin' Aero....
If you move the clip up the needle, you lower the needle, thereby leaning out the mid range. Oh an visa-a-versa.motormike wrote:....acknowledged Bear....thanx for giving up the info......STILL WONDERING...."what is result when moving the main jet needle up a notch ?".............
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: .....it's a flamin' Aero....
......right.....understoood.....I will be pulling this carb to clean, so I'll take note clip position during the disassembly, I'll check these jet sizes too.....the MANUAL failed to clearly explain the function and adjustments of the main jet needle, unless the info is located where I didn't look..........
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
Re: .....it's a flamin' Aero....
FYI, I just acquired a set of Aero 80 handlebars with both switch assemblies and brake levers. I will make you good deal on the left one.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: .....it's a flamin' Aero....
......a few more shots, in the daylight......
- Attachments
-
- All badges 100%
- DSC00600.JPG (165.06 KiB) Viewed 10248 times
-
- these "wings" on the front showing signs of a few challenging moments....
- DSC00609.JPG (165.3 KiB) Viewed 10248 times
-
- ...worst scratch on bike.
- DSC00610.JPG (163.92 KiB) Viewed 10248 times
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
Re: .....it's a flamin' Aero....
......and....
- Attachments
-
- ...OF COURSE>>>>>
- DSC00597.JPG (155.77 KiB) Viewed 10248 times
-
- .....Found those knicks that I missed the first time.....
- DSC00595.JPG (151.22 KiB) Viewed 10248 times
-
- ...I guess if you carry a spare, it works front or rear....alloy centers, baby.....
- DSC00593.JPG (155.66 KiB) Viewed 10248 times
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
Re: .....it's a flamin' Aero....
I'm not sure the 125 exhaust is a problem. A member on another forum put a CT intake (with adapter) and a 28 mm OKO on his and does 65 mph and it is only that fast because he won't use the 1/3 of throttle that is left.Wheelman-111 wrote:Greetings:
Grrrr, I'm jealous. Whaddya need that thing for anyway?! It's missing a back wheel!
Sinceriously good score, Dawg! You and The Bear can blaze the trail to eighth-liter 2-Smoke performance.
In another thread, I suggested a mild 125cc ENDURO pipe might be a good match for Scooter Duty. Bear misinterpreted that to mean a CR pipe, but I was thinking more MT-125. Yeah, it'll need some cuttin' an'-a-weldin' but the volume and geometry's been tried and tested.
Anyhow, Piped or not, should be a spacious fun ride.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: .....it's a flamin' Aero....
.......... .............. <<<<<<<this is EXACTLY how I look now.....
- Attachments
-
- FULL MONTY
- DSC00608.JPG (165.17 KiB) Viewed 10246 times
-
- WINDSCREEN NOT YELLOW....BEAD AROUND EDGE YELLOW....MINOR RUB MARKS......295,000 MILES ON THE F-150
- DSC00605.JPG (164.08 KiB) Viewed 10246 times
-
- ....MUFFLER GUARD TOOK ONE FOR THE TEAM.....
- DSC00601.JPG (163.62 KiB) Viewed 10246 times
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
- bradthreee
- Board Supporter
- Posts: 2142
- Joined: Tue Sep 12, 2006 4:20 pm
- Location: MARS...
- Wheelman-111
- Moderator
- Posts: 11321
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: .....it's a flamin' Aero....
Greetings:
Bear, 65 on a 125cc is respectable in my book. Maybe Honda-san did put a decent-performing pipe on it in the first place.
I've never even seen one, so you gotta pic? Real nice Mike!
Bear, 65 on a 125cc is respectable in my book. Maybe Honda-san did put a decent-performing pipe on it in the first place.
I've never even seen one, so you gotta pic? Real nice Mike!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: .....it's a flamin' Aero....
Not much to see.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: .....it's a flamin' Aero....
.....Good shot of those TWIN DAM* SHOCKS !!!...... .... .... ............>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"