1987 honda elite SE50 rear wheel noise
Moderator: Moderator
-
- Goped
- Posts: 51
- Joined: Fri Sep 16, 2011 12:06 pm
- Location: spring lake
1987 honda elite SE50 rear wheel noise
hello its making a weird rattling noise while im going down the road,what do you think it could be? when i let off the throttle it stops?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 1987 honda elite SE50 rear wheel noise
hello i have a 1987 honda elite SE50 that goes 38
could some one show me a link for a rear shock that would fit my scooter with no moddifications? im looking for smoother ride when i go off road ....as well i would like some more acceleration and better take off ,its now making a weird rattling noise while im going down the road , what do you think it could be? when i let off the throttle the rattling noise stops?
you wood do better if you put it all in one post..
swimmingfree
could some one show me a link for a rear shock that would fit my scooter with no moddifications? im looking for smoother ride when i go off road ....as well i would like some more acceleration and better take off ,its now making a weird rattling noise while im going down the road , what do you think it could be? when i let off the throttle the rattling noise stops?
you wood do better if you put it all in one post..
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 1987 honda elite SE50 rear wheel noise
You may have a worn belt
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Goped
- Posts: 51
- Joined: Fri Sep 16, 2011 12:06 pm
- Location: spring lake
Re: 1987 honda elite SE50 rear wheel noise
I just looked at the belt and its not a worn belt. What else?
Re: 1987 honda elite SE50 rear wheel noise
it could be any number of things, could be as simple as something loose that is vibrating aghainst metal. try greasing the speedometer cable. Where does the noise come from, front or rear? does it make the sound under load or can you replicate the noise with it on the stand?
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
Re: 1987 honda elite SE50 rear wheel noise
possible center stand.
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
-
- Goped
- Posts: 51
- Joined: Fri Sep 16, 2011 12:06 pm
- Location: spring lake
Re: 1987 honda elite SE50 rear wheel noise
You can here it when ur rolling it around,and its from the rear.
Re: 1987 honda elite SE50 rear wheel noise
check the center stand like evilone said and make sure there is oil in the rear trans case. btw it is not going to roll all smooth and quiet even though pushing it the clutch doesnt engage the bell housing and trans gears still move
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Goped
- Posts: 51
- Joined: Fri Sep 16, 2011 12:06 pm
- Location: spring lake
Re: 1987 honda elite SE50 rear wheel noise
How can I see if there is oil in the rear trans case? And if there isnt how can I put any in? And what kinda oil do I use? Please give me step by step directions on how to do this?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 1987 honda elite SE50 rear wheel noise
here,s the Manuel .. all the answer are here..
http://www.hondaspree.net/other/SE50_19 ... Manual.pdf
swimmingfree
http://www.hondaspree.net/other/SE50_19 ... Manual.pdf
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 1987 honda elite SE50 rear wheel noise
the answer are in sections 9
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Goped
- Posts: 51
- Joined: Fri Sep 16, 2011 12:06 pm
- Location: spring lake
Re: 1987 honda elite SE50 rear wheel noise
I can't find it,can you just tell me? How to check it? And how to add more?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 1987 honda elite SE50 rear wheel noise
did you down load the Manuel ???
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Goped
- Posts: 51
- Joined: Fri Sep 16, 2011 12:06 pm
- Location: spring lake
Re: 1987 honda elite SE50 rear wheel noise
Yes,and I can't find it. Can you just please tell me how?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 1987 honda elite SE50 rear wheel noise
if you don't no how to use the book its not a big deal.. all you have to do is look for 9-1 or 9- whatever you can spell so you shooed be able to read ??? so stop asking for help and help your self
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet