27mph thread
Moderator: Moderator
27mph thread
ok my thread about my bike not going over 27 mph got locked bc someone wanted to talk about the darn president and not try to help me.
the last thing i did was pull the jug off and it has a crack in it. not very big but i can fill it w/ my finger nail. i'm sure when it gets hot it expands.
could this be the problem i'm have w/ on being able to do 1/4 throttle and nothing more b/c it falls flat on it's face?
the last thing i did was pull the jug off and it has a crack in it. not very big but i can fill it w/ my finger nail. i'm sure when it gets hot it expands.
could this be the problem i'm have w/ on being able to do 1/4 throttle and nothing more b/c it falls flat on it's face?
Re: new 27mph thread b/c the other one got locked
cracked? really? that would be a definite problem regardless.
taz 50mm bbk, 51g. rollers,1500 c spring
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
24mm arreche, #20 pilot, E2 needle clip on lower groove
arreche air filter
Naruku intake, reeds & block
v8 pipe
stock gears
trail tech temp & rpm gauges
Re: new 27mph thread b/c the other one got locked
yeah. the crak isn't big at all but never the less it is theredun rite wrote:cracked? really? that would be a definite problem regardless.
Re: new 27mph thread b/c the other one got locked
Why haven't you posted any pics?
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Re: new 27mph thread b/c the other one got locked
i tried to get a pic of the crack but i just can't seem to get it to show up on the picture.evilone wrote:Why haven't you posted any pics?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: new 27mph thread b/c the other one got locked
were is the crack on the jug at the top ???
is there oil on the out side of the jug ???
are you sure its not a deep scrach ???
swimmingfree
is there oil on the out side of the jug ???
are you sure its not a deep scrach ???
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: new 27mph thread b/c the other one got locked
near the middle of the jug.swimmingfree wrote:were is the crack on the jug at the top ???
is there oil on the out side of the jug ???
are you sure its not a deep scrach ???
swimmingfree
didn't notice any oil on the outside.
pretty sure it's not a deep scrach b/c it has zig zags.
Re: new 27mph thread b/c the other one got locked
....it's hard to get rid of crack with Zig Zags
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
Re: new 27mph thread b/c the other one got locked
yeah. darn near impossiblemotormike wrote:....it's hard to get rid of crack with Zig Zags
Re: new 27mph thread b/c the other one got locked
hhahah motormike... ..you gotta get some brillo or cigarette ashes
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: new 27mph thread b/c the other one got locked
Greetings:
Do you mean the bore is scratched?
Or is there a crack through the body of the cylinder all the way through?
In the former case, a re-bore to the first oversize piston would fix. Better still, order a big-bore kit from Taz
In the second case, a new cylinder is the only remedy.
Do you mean the bore is scratched?
Or is there a crack through the body of the cylinder all the way through?
In the former case, a re-bore to the first oversize piston would fix. Better still, order a big-bore kit from Taz
In the second case, a new cylinder is the only remedy.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: new 27mph thread b/c the other one got locked
it looks like a crack bc it has some zig zags.Wheelman-111 wrote:Greetings:
Do you mean the bore is scratched?
Or is there a crack through the body of the cylinder all the way through?
In the former case, a re-bore to the first oversize piston would fix. Better still, order a big-bore kit from Taz
In the second case, a new cylinder is the only remedy.
Taz didn't have any kits and wasn't going to be getting any in tell spring so i ordered one from daywot.
Re: new 27mph thread b/c the other one got locked
ok, i put the 66cc bbk on today, changed the fuel line and vac line, and i still have the problem.
1/4 throttel is fine but anything else she wants to die. when it starts to die if i let off the throttle it's good. also when it starts to die after a 1/4 throttle if i stay on the throttle it will pick back up and go after a couple seconds.
edit: i also have changed carbs and reed.
i haven't changed the spark plug. i'll be doing that tomorrow. although i wouldn't think that would be the problem.
1/4 throttel is fine but anything else she wants to die. when it starts to die if i let off the throttle it's good. also when it starts to die after a 1/4 throttle if i stay on the throttle it will pick back up and go after a couple seconds.
edit: i also have changed carbs and reed.
i haven't changed the spark plug. i'll be doing that tomorrow. although i wouldn't think that would be the problem.
Last edited by iceman77 on Mon Jan 02, 2012 8:34 pm, edited 1 time in total.
Re: new 27mph thread b/c the other one got locked
This is an no brainer and I could tell you how to fix this but you are such an A-hole that it will be a cold day before I ever help you.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: new 27mph thread b/c the other one got locked
you couldn't help the last time and it's the same problem. you just think you know it all. if you knew as much as you thought you did, then you really could help people.Bear45-70 wrote:This is an no brainer and I could tell you how to fix this but you are such an A-hole that it will be a cold day before I ever help you.
if you don't have anything usefull to say, then don't post.
thanks:
TJ