NQ50 Big Bore Kit Instructions?
Moderator: Moderator
NQ50 Big Bore Kit Instructions?
Hello all! I just got a 1985 Honda Spree . It runs great so far, however, all the roads I need to travel on are at most 35mph. My Spree, Candies, tops out at 25mph on a flat surface. I've done some research and seen that you can buy a big bore kit from chopchop001 on ebay to make it go at least 35mph. I am mechanically inclined but by no means a mechanical genius or claim to know why things work. So, my question is, how easy was it to install one of these kits, do I have to buy anything in conjunction with this kit to make it sucessful, and does the kit come with instructions? Thanx.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: NQ50 Big Bore Kit Instructions?
witch kit are you thinking of doing??? chopchop001 i thing is tazland001 on here ..
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: NQ50 Big Bore Kit Instructions?
The 48mm. Thanks, I'll look him or her up.
"Well, this fits here...like that...and this here...like that...and d***, I broke it AGAIN" hahaha
Re: NQ50 Big Bore Kit Instructions?
Him and he is outside Vegas.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: NQ50 Big Bore Kit Instructions?
heres 2 and i think he has 3 kits all 48 mm and the one i cant fine has a bigger carb then stock...
swimmingfree
http://www.ebay.com/itm/Honda-Spree-Eli ... 3374dbe3ab
http://www.ebay.com/itm/Honda-Spree-Eli ... 564627f90d
swimmingfree
http://www.ebay.com/itm/Honda-Spree-Eli ... 3374dbe3ab
http://www.ebay.com/itm/Honda-Spree-Eli ... 564627f90d
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: NQ50 Big Bore Kit Instructions?
Thanx again...will the 48 get me up to 35mph?
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: NQ50 Big Bore Kit Instructions?
Last edited by swimmingfree on Sat Apr 21, 2012 2:02 pm, edited 1 time in total.
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: NQ50 Big Bore Kit Instructions?
Im not seeing a difference in these kits...
"Well, this fits here...like that...and this here...like that...and d***, I broke it AGAIN" hahaha
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: NQ50 Big Bore Kit Instructions?
The Stage 2 kit is a 48mm BBK with a 16*82 gear ratio upgrade. The gear ratio is what provides more top.
*This gear set will work for the elite E (SB50) but you will have to shave the secondary gear for it to fit into the bearing. This work is only required for the Elite E(SB50) and not for the spree. Your local machine shop can provide this service.
*This gear set will work for the elite E (SB50) but you will have to shave the secondary gear for it to fit into the bearing. This work is only required for the Elite E(SB50) and not for the spree. Your local machine shop can provide this service.
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: NQ50 Big Bore Kit Instructions?
Here is his store. Get the kit with the gears or your top speed will have minimal change.
http://stores.ebay.com/alluneed-scooter ... 4340.l2563
FYI, I think he is out of carb/intake kits right now.
Oh and the difference in the kits is that the stage 2 has the gears, which is what you want.
http://stores.ebay.com/alluneed-scooter ... 4340.l2563
FYI, I think he is out of carb/intake kits right now.
Oh and the difference in the kits is that the stage 2 has the gears, which is what you want.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: NQ50 Big Bore Kit Instructions?
You know, maybe I'm jumping in too fast..Imma check for carbon buildup and loose belt to see if its just a performance issue. I think the 85 should be able to get up to 35 by itself no problem...
-
- Spree
- Posts: 136
- Joined: Fri Dec 10, 2010 10:08 pm
- Location: Milport In.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: NQ50 Big Bore Kit Instructions?
wish you luck on it ... if your lucky you will get 30 but it done hurt to try... you may want to try this as well http://hondaspree.net/wiki/index.php5?t ... r_Cleaning
swimmingfree...
swimmingfree...
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: NQ50 Big Bore Kit Instructions?
I have the Tazz kit and re-did an old pipe
My little spree is a blast to ride
and the extra power is noticeable but don't think you will be popping wheelies .
Well small ones maybe ?
My little spree is a blast to ride
and the extra power is noticeable but don't think you will be popping wheelies .
Well small ones maybe ?
- Attachments
-
- IMG_0417.jpg (70.69 KiB) Viewed 20204 times
-
- 100_1993.jpg (188.36 KiB) Viewed 20204 times
-
- 100_1992.jpg (115.55 KiB) Viewed 20204 times
Re: NQ50 Big Bore Kit Instructions?
Hahaha no wheelies for me. Im just trying to get where I need to go and go the speed limit. If you guys dont think I can get at least 30 without a kit I believe you, I am inexperienced here. I just dont want to buy the kit and it turns out to be a complete custom job nightmare.