Time to upgrade the spree...
Moderator: Moderator
Time to upgrade the spree...
i thought i would start a thread with easy upgrades that im going to do on the spree that will hopefully let me cruise at 35 and max around 40.
1. Im going to get a milled 1985 head The '84 and '85 have the small chamber which is desirable over the '86 and '87 big chamber head.
2. step two is im going to get a new power 4 ports reeds and intake and and 21mm pkw carb
THis normaly wouldnt be possible to add on the spree but with a friend named bear anything is possible
3. im going to get tazs gears
eventualy i might upgrade to the bbk but i just bough this cylinder and i want to put a few miles on her before i get a bbk.
THIS should be interesting ill post pics when i get all the parts and everything while im building
1. Im going to get a milled 1985 head The '84 and '85 have the small chamber which is desirable over the '86 and '87 big chamber head.
2. step two is im going to get a new power 4 ports reeds and intake and and 21mm pkw carb
THis normaly wouldnt be possible to add on the spree but with a friend named bear anything is possible
3. im going to get tazs gears
eventualy i might upgrade to the bbk but i just bough this cylinder and i want to put a few miles on her before i get a bbk.
THIS should be interesting ill post pics when i get all the parts and everything while im building
Last edited by abreen89 on Sat May 05, 2012 12:00 pm, edited 1 time in total.
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Time to upgrade the spree...
good luck hitting 40 with a stock bore and those gears maybe with some extreme porting to the bore but unlikly untill you fit that BBK
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Time to upgrade the spree...
when squezz a turd (spree motor) for all you can get out of it...... a taller tire is going to help and with the bbk you will have the tork so it will help i no a 10/3 tire will fit and thats a small gain but its a gain..
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Time to upgrade the spree...
That looks like a intake setup for a horizontal minerelli motor, but no matter what its actually for it WILL NOT fit your motor.
The only intake kit for the spree motor is sold by a member on these forums named tazzland001 (sp?), and again I'm pretty sure the one in your pic isn't it.
The only intake kit for the spree motor is sold by a member on these forums named tazzland001 (sp?), and again I'm pretty sure the one in your pic isn't it.
1986 Spree w/ '87 SE50 motor
1985 Aero 50 w/ Dio motor: On Hold
1985 Aero 50 w/ Dio motor: On Hold
Re: Time to upgrade the spree...
devenex wrote:That looks like a intake setup for a horizontal minerelli motor, but no matter what its actually for it WILL NOT fit your motor.
The only intake kit for the spree motor is sold by a member on these forums named tazzland001 (sp?), and again I'm pretty sure the one in your pic isn't it.
like i said anything is possible when you have a friend named bear...
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Time to upgrade the spree...
if you dont need input or want in put then dont post....
"like i said anything is possible when you have a friend named bear..."
he wood say ...why post?????
swimmingfree
"like i said anything is possible when you have a friend named bear..."
he wood say ...why post?????
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Time to upgrade the spree...
swimmingfree wrote:if you dont need input or want in put then dont post....
"like i said anything is possible when you have a friend named bear..."
he wood say ...why post?????
swimmingfree
lol i dont mind the inpute thats why im posting im just letting him know bears helping me on this and he has the adapters from intake to engine for this setup as soon as i get pics ill post em up for you guys to see.. lol we are chatting on the internet its kind of hard to tell whether or not someone is being rude or not so when your reading my posts just assume im in a good mood because when im talking about scooters i normally am lol.
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
Re: Time to upgrade the spree...
abreen89 wrote:swimmingfree wrote:if you dont need input or want in put then dont post....
"like i said anything is possible when you have a friend named bear..."
he wood say ...why post?????
swimmingfree
why do you say that swimmingfree ??? lol i dont mind the inpute thats why im posting im just letting him know bears helping me on this and he has the adapters from intake to engine for this setup as soon as i get pics ill post em up for you guys to see.. lol we are chatting on the internet its kind of hard to tell whether or not someone is being rude or not so when your reading my posts just assume im in a good mood because when im talking about scooters i normally am lol.
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: Time to upgrade the spree...
i fiiger he had the adapters laying arond ..
he got lots of parts hiding here and there ..
it going to be fun having bear help you make speed out of the spree
swimmingfree
he got lots of parts hiding here and there ..
it going to be fun having bear help you make speed out of the spree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: Time to upgrade the spree...
This is the first time I've seen that type of manifold adapted to the spree, should be interesting.
Just curious, was tazz out of stock or did you want to try something new?
Just curious, was tazz out of stock or did you want to try something new?
1986 Spree w/ '87 SE50 motor
1985 Aero 50 w/ Dio motor: On Hold
1985 Aero 50 w/ Dio motor: On Hold
Re: Time to upgrade the spree...
devenex wrote:This is the first time I've seen that type of manifold adapted to the spree, should be interesting.
Just curious, was tazz out of stock or did you want to try something new?
Taz was out of stock but i just recieved a pm that he ordered some more and they will be in on Tuesday so i will be bying tazs carb/intake kit instead. Just makes sense
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
Re: Time to upgrade the spree...
okay all the parts have been ordered im going with the taz 21mm PWK setup with intake instead of the one above but they are essentialy the same pieces. I am also going with taz gears, and head should be here today. Taz has told me no one he know of has tried doing this particular setup before so should be interesting to get her tuned in and see what happens. I will start with a 88 main jet which should work but if not work up from there.
'89 Honda Elite SB50p STOCK
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
'85 Honda Spree NQ50 STOCK sold
'85 Honda Spree NQ50 48mm bbk, taz gears, 18mm carb w/ ct intake
'86 Honda Aero NB50 Stock In The Works
'86 Honda Aero NB50 Stock
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Time to upgrade the spree...
No no no you dont start low on jet and work up you start high and work down or you risk damage to the bore
like i said start at 95 and work down
like i said start at 95 and work down
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Time to upgrade the spree...
Taz the guy that sells theses kits says an 88 works. You are not listening very well.paulpauly7 wrote:No no no you dont start low on jet and work up you start high and work down or you risk damage to the bore
like i said start at 95 and work down
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Time to upgrade the spree...
he also says no one has done this setup befor so a 88 main is just a guess
are you bear saying starting at 88 and working up is the correct way to tune jets if so you are contradicting your own words
thats all i have to say to you TROLL reply all you want
are you bear saying starting at 88 and working up is the correct way to tune jets if so you are contradicting your own words
thats all i have to say to you TROLL reply all you want
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250