CT Manifold
Moderator: Moderator
-
- Spree
- Posts: 161
- Joined: Mon Aug 24, 2009 10:18 am
- Location: Kadena ABS, Okinawa Prefecture, Japan
CT Manifold
The CT intake manifold is typically for bigger carbs, 24mm+ but I want to use it with a small Carb. is there a way to make the Carb output bigger? or to make the intake smaller?
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50
'96 "Frankenstein" Japanese Jog Cy50
Re: CT Manifold
Where did you get that idea? It will work with anything you want to mount on it, even a stock carb.DaylightDies wrote:The CT intake manifold is typically for bigger carbs, 24mm+ but I want to use it with a small Carb. is there a way to make the Carb output bigger? or to make the intake smaller?
Here is a CT with an 18mm carb off an Aero 125 for my 1985 Aero 50 with a mini BBK (43mm).
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Spree
- Posts: 161
- Joined: Mon Aug 24, 2009 10:18 am
- Location: Kadena ABS, Okinawa Prefecture, Japan
Re: CT Manifold
=-O I didn't know they can tighten down that much. Thank you bear!
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50
'96 "Frankenstein" Japanese Jog Cy50
Re: CT Manifold
jog dont need pwk21-28mm carb. suck more petrol fuel and make more noise!
dellorto phbg carb is good enough.
my jog dont have problem and start 1 kick always ran 12mm carb on polini bore.
im sure the pe/pwk carb will rub the main frame, not much room for run airbox.
dellorto phbg carb is good enough.
my jog dont have problem and start 1 kick always ran 12mm carb on polini bore.
im sure the pe/pwk carb will rub the main frame, not much room for run airbox.
Last edited by veedubh20 on Mon Aug 20, 2012 12:16 am, edited 1 time in total.
Re: CT Manifold
What does tighten down mean?DaylightDies wrote:=-O I didn't know they can tighten down that much. .......................
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Spree
- Posts: 161
- Joined: Mon Aug 24, 2009 10:18 am
- Location: Kadena ABS, Okinawa Prefecture, Japan
Re: CT Manifold
The hose clamps on the intake of the manifold. @veedubh 12mm is kind of small and it is very hot here I think 17.5mm is the smallest ill go on a bbk.
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50
'96 "Frankenstein" Japanese Jog Cy50
Re: CT Manifold
No, you can't tighten the hose clamp extra, beside the smaller carb has to bolt up to something, so you have an adapter made. Look closely at my pic and you will see the carb bolted to the adapter that plugs into the rubber.DaylightDies wrote:The hose clamps on the intake of the manifold. @veedubh 12mm is kind of small and it is very hot here I think 17.5mm is the smallest ill go on a bbk.
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
-
- Spree
- Posts: 161
- Joined: Mon Aug 24, 2009 10:18 am
- Location: Kadena ABS, Okinawa Prefecture, Japan
Re: CT Manifold
ahhh I see, what if my Carb doesn't have the flange like yours does?
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50
'96 "Frankenstein" Japanese Jog Cy50
Re: CT Manifold
the bws 100 is 16mm teikei carb is 16mm.
all the jog carb 12,14,16mm on the rear carb inlet pipe of a carb is 18mm. ( not talking about the outside pipe mount).
all the jog carb 12,14,16mm on the rear carb inlet pipe of a carb is 18mm. ( not talking about the outside pipe mount).
Re: CT Manifold
you can get a 17.5mm dellorto cloned carb for around 30 bucks
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Spree
- Posts: 161
- Joined: Mon Aug 24, 2009 10:18 am
- Location: Kadena ABS, Okinawa Prefecture, Japan
Re: CT Manifold
:O PM pls!Mystic wrote:you can get a 17.5mm dellorto cloned carb for around 30 bucks
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50
'96 "Frankenstein" Japanese Jog Cy50
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
-
- Spree
- Posts: 161
- Joined: Mon Aug 24, 2009 10:18 am
- Location: Kadena ABS, Okinawa Prefecture, Japan
Re: CT Manifold
I liked my 19mm Arreche on my Jog in the states. I would like to get a 17.5mm Arreche.Downsouthdio wrote:Arreche 17.5 or 19mm,
'98 Yamaha Jog Cy50k
'96 "Frankenstein" Japanese Jog Cy50
'96 "Frankenstein" Japanese Jog Cy50