..
Moderator: Moderator
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: 86 Honda Spree stetch build
We have high hopes for this one
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: 86 Honda Spree stetch build
.
Last edited by LMH on Tue Dec 30, 2014 11:56 am, edited 1 time in total.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 86 Honda Spree stetch build
so what is the speed going to be ????
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 86 Honda Spree stetch build
so what dose trans have to do with speed????
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 86 Honda Spree stetch build
.
Last edited by LMH on Tue Dec 30, 2014 11:57 am, edited 1 time in total.
Re: 86 Honda Spree stetch build
.
Last edited by LMH on Tue Dec 30, 2014 11:57 am, edited 1 time in total.
Re: 86 Honda Spree stetch build
Next its to be cleaned up, bead blasted, chopped, stretched, welded then final reinforcements installed and performed. Still deciding on the engine choice. Ive already begun building another extreme ported af16e case with MHR crank/ fully ported Corsa/8.44 gears/CT/24mm Keihen PWK and may just use that until I make up my mind.
Last edited by LMH on Thu Nov 14, 2013 8:49 am, edited 1 time in total.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 86 Honda Spree stetch build
is that 2 frames welded together???
swimmingfree
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 86 Honda Spree stetch build
.
Last edited by LMH on Tue Dec 30, 2014 11:58 am, edited 1 time in total.
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 86 Honda Spree stetch build
[/quote]
see now why i finger it was 2 frames welded together the cross weld .. but its just to help hold it togher....
swimmingfree
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
Re: 86 Honda Spree stetch build
.
Last edited by LMH on Tue Dec 30, 2014 11:58 am, edited 1 time in total.
Re: 86 Honda Spree stetch build
Nice! subscribed!
Build thread viewtopic.php?nomobile=1&f=16&t=28508
Re: 86 Honda Spree stetch build
.
Last edited by LMH on Tue Dec 30, 2014 11:59 am, edited 1 time in total.