yes im not gonna use the left plastic cover. ive observed and took advice from my friend in the Philippines that had built the fastest honda dios in our town. The heat escapes faster when that side is open. But im not gonna argue to anyone in here that preffered to keep it. just happend that i trust him when it comes to tuning bikes overall.Wheelman-111 wrote:Greetings:
I agree, nicely done. Particularly the concealed wires in the frame. I know how much of a PITA that job is, but worth the time. You don't plan on running it without the left cooling shroud, do you? 90 percent of Forum posts describing that practice burn up sooner or later. The other 10% lie.
nujee scooter builds-elite/spree/met/xl70/xs400/ruckus, etc.
Moderator: Moderator
Re: nujee scooter builds - dio spree + naked elite
Build thread viewtopic.php?nomobile=1&f=16&t=28508
Re: nujee scooter builds - dio spree + naked elite
today I decided I should make a rear rack for my spree so I can carry a gallon of gas on long rides. I have 2 extra rear racks from the elite so I'm gonna mod it to fit the spree.
thought about mounting it on the front too.
il have it cleaned up.. then weld a sheet metal as a mounting base and drill holes matching the existing bolts
thought about mounting it on the front too.
il have it cleaned up.. then weld a sheet metal as a mounting base and drill holes matching the existing bolts
Build thread viewtopic.php?nomobile=1&f=16&t=28508
-
- Goped
- Posts: 97
- Joined: Sat Feb 16, 2013 5:30 pm
- Location: west michigan
Re: nujee scooter builds - dio spree + naked elite
no f'in way you have a t27, that is my favorite car ive ever had i had a 2tg head on a 3t block setup with cheep cycle carbs, oh yeah and i was still running the 2spd toyoglide
Re: nujee scooter builds - dio spree + naked elite
haha.. one of my dream cars so I gotta have it.welder steve wrote:no f'in way you have a t27, that is my favorite car ive ever had i had a 2tg head on a 3t block setup with cheep cycle carbs, oh yeah and i was still running the 2spd toyoglide
Build thread viewtopic.php?nomobile=1&f=16&t=28508
-
- Goped
- Posts: 97
- Joined: Sat Feb 16, 2013 5:30 pm
- Location: west michigan
Re: nujee scooter builds - dio spree + naked elite
it was mine i wish i never sold it i just smiled everytime i started it up
- kingearwig
- Spree
- Posts: 207
- Joined: Thu Feb 25, 2010 6:04 am
Re: nujee scooter builds - dio spree + naked elite
nujee wrote:that i dont know yet.. i have wood floorboard done but i dont know if il put it.. Im thinking of using plexi glass also.kingearwig wrote:thanks for the link. The naked elite is looking good. What is your plan for a floorboard?
If you didn't already have the frame powder coated I would tell you to go with pegs... but a little late for that.
Re: nujee scooter builds - dio spree + naked elite
quick update.
Build thread viewtopic.php?nomobile=1&f=16&t=28508
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: nujee scooter builds - dio spree + naked elite
Greetings:
Man, that's Clean! Just a hint though, figure out some kinda front fender or don't ride in the rain...
Man, that's Clean! Just a hint though, figure out some kinda front fender or don't ride in the rain...
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: nujee scooter builds - dio spree + naked elite
Ha! yeah I need some kind of fender. Thanks!Wheelman-111 wrote:Greetings:
Man, that's Clean! Just a hint though, figure out some kinda front fender or don't ride in the rain...
Build thread viewtopic.php?nomobile=1&f=16&t=28508
- Dio89Elite
- Elite
- Posts: 701
- Joined: Wed Feb 01, 2012 3:55 pm
- Location: 50th state
Re: nujee scooter builds - dio spree + naked elite
beautiful build! thx for sharing!
Re: nujee scooter builds - Honda Ruckus
A bike I started building last month.. This is my 3rd ruckus. The 2nd one only lasted 3 weeks and got sold. Deadline was to make it to Vespa Scooter Annual Toy Run in San Diego (December 15, 2013). All I wanted is a simple yet clean looking ruck this time.. no gy6, no super low stance, not too stretched, not too fancy and it has to be white so I bought new shasta white rear frame and battery box. Here we go.
Stripped the bike and had front frame powdercoated. Stickerbomb the bottom part of the gas tank.
Got all the parts needed.. so I started to put them together.
put a barcode to show ownership
Had a local upholstery shop made me a seat.
Almost done..
And here it is.. done
pic taken during the toy run
Stripped the bike and had front frame powdercoated. Stickerbomb the bottom part of the gas tank.
Got all the parts needed.. so I started to put them together.
put a barcode to show ownership
Had a local upholstery shop made me a seat.
Almost done..
And here it is.. done
pic taken during the toy run
Build thread viewtopic.php?nomobile=1&f=16&t=28508
- Downsouthdio
- CB900F
- Posts: 1205
- Joined: Wed Dec 21, 2011 11:00 am
- Location: Key west
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
I couldnt get my trail tech to read my speed correctly..calibrated it correctly also
Honda super dio
Corsa
26mm
Sparrow
Corsa
26mm
Sparrow
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
Greetings:
Fine-looking Ruck, Nujee. I like the Majesty and the vintage Opel(?) too!
Fine-looking Ruck, Nujee. I like the Majesty and the vintage Opel(?) too!
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
-
- Veteran OG
- Posts: 3639
- Joined: Tue May 22, 2007 8:10 pm
- Location: North of Seattle, WA
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
Nice scooters
1974 (or so) Corolla two door? Looking better than newWheelman-111 wrote:vintage Opel(?) too!
Re: nujee scooter builds-elite/spree/met/xl70/xs400/ruckus,
Thanks!!
Wheelman- big scoot on the left is a Yamaha Morphous, i love that scoot that it made me decide that I dont need my Ninja anymore.. So I'll be selling that.
mousewheel is correct, its an old Corolla, 1973.
Wheelman- big scoot on the left is a Yamaha Morphous, i love that scoot that it made me decide that I dont need my Ninja anymore.. So I'll be selling that.
mousewheel is correct, its an old Corolla, 1973.
Build thread viewtopic.php?nomobile=1&f=16&t=28508