Malossi big bore kit for SE50
Moderator: Moderator
-
- Noob
- Posts: 9
- Joined: Wed Sep 24, 2014 8:14 pm
- Location: Fort Worth, TX
Malossi big bore kit for SE50
Im about to order the Malossi BBK(65cc??) for my 93 elite SR(afo5e), and I have a few questions I'm hoping to get the answers to. Ive searched around a lot but can't seem to find concrete information. Any input would help a lot, thanks!
Here is a link to the BBK Im going to order. Is this a 65cc bore kit?
http://scooterswapshop.com/store/scoote ... g-bore-kit
My questions are..
1) Does this come with everything that I will need for my bike to run properly? I realize I can make it faster with gears, intake, exhausts, etc. But I just want it to run well for now.
2) Will I need to premix oil for this bbk on top of the oil injection system, or will the stock oil injection system be enough?
3) What is the break in routine for this?
Here is a link to the BBK Im going to order. Is this a 65cc bore kit?
http://scooterswapshop.com/store/scoote ... g-bore-kit
My questions are..
1) Does this come with everything that I will need for my bike to run properly? I realize I can make it faster with gears, intake, exhausts, etc. But I just want it to run well for now.
2) Will I need to premix oil for this bbk on top of the oil injection system, or will the stock oil injection system be enough?
3) What is the break in routine for this?
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Malossi big bore kit for SE50
Pm graphite9 I just bought one from him and he can answer those questions for ya. He's been a great help with my install. Great seller.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Malossi big bore kit for SE50
You will need to upjet your carb and yes you will need to add some premix to the tank or remove the oil pump grind the teeth off the gear shaft reinstall and run full premix in the tank at 32:1 .
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
-
- Noob
- Posts: 9
- Joined: Wed Sep 24, 2014 8:14 pm
- Location: Fort Worth, TX
Re: Malossi big bore kit for SE50
Will I have to run premix all the time or just during the break in period? If I keep the stock oil pump what would the premix ratio have to be?paulpauly7 wrote:You will need to upjet your carb and yes you will need to add some premix to the tank or remove the oil pump grind the teeth off the gear shaft reinstall and run full premix in the tank at 32:1 .
I've pm'ed him and emailed him on his website, still haven't gotten a reply.Rip_City_Spree wrote:Pm graphite9 I just bought one from him and he can answer those questions for ya. He's been a great help with my install. Great seller.
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Malossi big bore kit for SE50
Patience bud he's got a busy life but he will get in touch.
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
- patthesoundguy
- Moderator
- Posts: 3159
- Joined: Mon Mar 29, 2010 11:38 am
- Location: Nova Scotia, Canada
- Contact:
Re: Malossi big bore kit for SE50
Scooterswapshop rules. Don't worry graphite9 will take great care of you when you order that big bore kit from him. he took geat care of me when I did my dio spree.
Dude! Ya Can't Fix Stupid!
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
84 Spree stock
84 Spree Dio AF18E MHR Cylinder Arrow Pipe 28mm OKO
80 Express, 47mm DR BBKit, Weak Ends Intake, Boyesen Dual stage reeds, 19mm Delorto carb, MLM pipe
79 Express
85 Aero 80 stock
84 elite 125 stock
-
- Elite
- Posts: 411
- Joined: Fri Jul 22, 2011 2:04 pm
- Location: Maine
Re: Malossi big bore kit for SE50
He will definitely take care of you. Give it time. It is possible to run the pump and a mild premix but full premix is definitely the way to go if you're going with a bore kit. It will help prolong the life and performance of the bore for sure! I know premixing sounds like a PITA now, but you'll get used to it, and your elite will thank you for it. 32:1 like pauly said. Choose a nice oil and stick to it! Castor 927 snd klotz r50 are a couple good choices.
Break in period will be different depending who you talk to. There is plenty of info on here if you search, and in sure graphite9 can give you some pointers. Pretty much start with heat cycling and be sure to run a couple tanks worth of half throttle riding before you start giving it all it has to offer!
Break in period will be different depending who you talk to. There is plenty of info on here if you search, and in sure graphite9 can give you some pointers. Pretty much start with heat cycling and be sure to run a couple tanks worth of half throttle riding before you start giving it all it has to offer!
- Rip_City_Spree
- CB900F
- Posts: 1379
- Joined: Sun Jun 13, 2010 7:47 pm
Re: Malossi big bore kit for SE50
Hey Kevin how many ounces is 32:1 my math sucks. Like 2 oz?
01 Elite SR
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
polini corsa
Polini 26mm Carb
Naraku intake
Naraku sport variator
Currently 5g rollers
zx trans
Arrow
red contra with yellow clutch springs.
RIP CITY
RIP NO MERCY KERSEY
Re: Malossi big bore kit for SE50
4 oz to the gallon is 32:1
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
-
- Noob
- Posts: 9
- Joined: Wed Sep 24, 2014 8:14 pm
- Location: Fort Worth, TX
Re: Malossi big bore kit for SE50
Thanks for all the input everyone! Graphite, I sent you another PM regarding purchasing the bbk.