2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
Moderator: Moderator
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
what pulley/ramp? polini
what is crusing temps/rpm at 50mph with that tune? 300-310 about 9,600 ish
how much do you weigh? 160 lbs
what is crusing temps/rpm at 50mph with that tune? 300-310 about 9,600 ish
how much do you weigh? 160 lbs
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
after 5+ months the rear rims arrived
pre ordered from jiangwayne.com july 24
received front rims sept twenty something
jiangwayne had a problem with rears wrong spline count
that is why it took so long to get rears
when I pre ordered and saved $ 21.00 on each rim 84.00 total
and a break on shipping so it was worth the wait to me
Part numbers front has 12 mm axle
RPM 10"x2.15J Front Wheel (Dio TDM, Black) - 44650-GW0-R02B
RPM 10"x2.15J Rear Wheel (Dio, Black) - 42601-GW0-R02B
was going to use the rims I had but like the looks of the straight spokes better
probably going to sell since i bought 2 sets of the other ones
pre ordered from jiangwayne.com july 24
received front rims sept twenty something
jiangwayne had a problem with rears wrong spline count
that is why it took so long to get rears
when I pre ordered and saved $ 21.00 on each rim 84.00 total
and a break on shipping so it was worth the wait to me
Part numbers front has 12 mm axle
RPM 10"x2.15J Front Wheel (Dio TDM, Black) - 44650-GW0-R02B
RPM 10"x2.15J Rear Wheel (Dio, Black) - 42601-GW0-R02B
was going to use the rims I had but like the looks of the straight spokes better
probably going to sell since i bought 2 sets of the other ones
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
I might be intrested in the 6 spoke set if you sell em.
Last edited by curtis966 on Mon Dec 15, 2014 5:18 pm, edited 1 time in total.
86 Aero 50,Polini 65cc BBK,malossi oring head,100 oct. 32:1
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
21mm OKO,Malossi Wild Lion exhaust,
Stock Ruck vari, malossi special belt,1.5k shoes,1k center,
aftermarket bell, front/rear metro wheels, TT vapor,
5in stretch on motor mount,280mm Shock.
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
If Curtis doesn't buy them I will. They look sweet!
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
steering stem 14.75 inch from bottom of race to top
2.0 inch of full thread 2.25 inch counting partial threads
will edit later for thread pitch diameter and bearing race diameter ect
the bottom part of pic is what the stem looks like after you cut the forks off EDIT 12-26-2014
Dio style with 12mm axel / Ruckus triple tree comparison
so if you use a ruckus triple tree the spacers would need to be 13mm wider on each side
to keep the rim centered
45.5mm 1.791 inch total on speedometer side
25mm .984 inch on other side
dio style with 12mm axel triple tree stock spacers
32.5mm 1.2795 inch total on speedometer side
12mm.472 inch on other side
I would assume the 10mm axel forks have identical spacers
2.0 inch of full thread 2.25 inch counting partial threads
will edit later for thread pitch diameter and bearing race diameter ect
the bottom part of pic is what the stem looks like after you cut the forks off EDIT 12-26-2014
Dio style with 12mm axel / Ruckus triple tree comparison
so if you use a ruckus triple tree the spacers would need to be 13mm wider on each side
to keep the rim centered
45.5mm 1.791 inch total on speedometer side
25mm .984 inch on other side
dio style with 12mm axel triple tree stock spacers
32.5mm 1.2795 inch total on speedometer side
12mm.472 inch on other side
I would assume the 10mm axel forks have identical spacers
Last edited by cruzingratiot on Fri Dec 26, 2014 12:56 pm, edited 3 times in total.
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
Making a stem?
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
thinking about making the stem instead of welding 2 together
or
seeing if I can save this one and mount / weld it into a dio or ruckus tree
the tree that came with front I bought didn't like how it was welded
keeping my options open
or
seeing if I can save this one and mount / weld it into a dio or ruckus tree
the tree that came with front I bought didn't like how it was welded
keeping my options open
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
so if you mill / grind the weld off the bottom of the ruckus tree
and push the stem out
the hold diameter is the same size as the elite stem
so if you can get the weld off the elite stem
push it into the ruckus stem
re weld the bottom (and maybe drill and a plug weld on side)
you would be good to go
and push the stem out
the hold diameter is the same size as the elite stem
so if you can get the weld off the elite stem
push it into the ruckus stem
re weld the bottom (and maybe drill and a plug weld on side)
you would be good to go
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
- AIO MotorSportS
- Goped
- Posts: 76
- Joined: Fri Dec 13, 2013 6:06 pm
- Location: USA
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
Nice work,could be look like my one when you finish the front set up
- Attachments
-
- CAM00826-1-1.jpg (222.21 KiB) Viewed 7054 times
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
cruzingratiot wrote:so if you mill / grind the weld off the bottom of the ruckus tree
and push the stem out
the hold diameter is the same size as the elite stem
so if you can get the weld off the elite stem
push it into the ruckus stem
re weld the bottom (and maybe drill and a plug weld on side)
you would be good to go
Honda DIO 3 ZX Live, Malossi, WindJammah!
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
I was a machinist for 20 yearsgraphite9 wrote:Why don't you cut the ruck tree, and weld the elite tree upper to it? Sleeve it, its a cake walk. You don't want to be welding and messing with the attachmen points, unless your really skilled with metal fab.
and have fabricated many things
and want to show different ways to do things
this isn't my first sterring stem project
and i already have a elite welded stem in my possestion
i just want a one piece stem
here is my first fork swap
1984 Kawasaki 750 Turbo
with 2000 Kawasaki zrx 1100 forks and custom stem
Suzuki Hayabusa swingarm with a Kawasaki rim ,r6 handlebars
and many other mods that i performed
which is still in my possession
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
-
- BMX
- Posts: 40
- Joined: Sat Jan 10, 2015 6:21 pm
- Location: United States
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
What are the 6 spoke wheels from. I'm curious as to what wheel choices I'll have in the future. Thanks
-
- Elite
- Posts: 654
- Joined: Fri Mar 16, 2012 11:43 pm
- Location: Las Vegas Nv
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
Finally got around to checking your thread out.. Looks like g9 will be getting more of money. I'm still sub 70s with a corsa ,grrr. Nice work
78 Kromag. (Briton Bee) .. Under the knife.. Derbi pyramid port dual variated
78 flying dutchman.. e50 swap. mlm pipe custom tank seat.. gila kit
85 Honda spree . Af16 swap joerock mhr mini stroke scorpion pipe.
78 flying dutchman.. e50 swap. mlm pipe custom tank seat.. gila kit
85 Honda spree . Af16 swap joerock mhr mini stroke scorpion pipe.
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
Greetings:
That ZX 750 Turbo is a true gem.
The boxes for the rims say "For Best Rider Only". Gotta love those Chinese translations.
That ZX 750 Turbo is a true gem.
The boxes for the rims say "For Best Rider Only". Gotta love those Chinese translations.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
- cruzingratiot
- Elite
- Posts: 409
- Joined: Mon Jun 17, 2013 1:24 am
- Location: Detroit michigan , 2000 Purple elite s ,2001 Black elite s ,
Re: 2000 Mystic Purple Elite build 74.6 MPH 80 + MPH
Wheelman-111 wrote:Greetings:
That ZX 750 Turbo is a true gem.
The boxes for the rims say "For Best Rider Only". Gotta love those Chinese translations.
i was waiting for someone to see and comment on that "For Best Rider Only".
That ZX 750 Turbo is a true gem.
Thank you i have alot of time in it
the 6 spoke are honda dio stylewillburr76 wrote:What are the 6 spoke wheels from. I'm curious as to what wheel choices I'll have in the future. Thanks
or aftermarket
KN Planning MODEL : WH17
http://japan.webike.net/products/21357113.html
Donate Life
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850
6-7-04 Liver Transplant Recipitant
http://www.donatelife.net/
Thank You
My 2000 Mystic Purple Elite Build
LINK -> viewtopic.php?f=16&t=27850