-Is there a difference in seats between the 1984 and 1985 Spree's?
-If you buy a big bore piston and gasket kit, is that all you need? As in, can everything else be stock and it will all work?
Thank you, Aaron.
2 quick questions from a spree noob
Moderator: Moderator
-
- Noob
- Posts: 14
- Joined: Mon Jun 22, 2015 3:43 am
- Location: Central NJ
- swimmingfree
- CBR1000RR
- Posts: 3357
- Joined: Tue Jun 14, 2011 12:28 pm
- Location: mich.
Re: 2 quick questions from a spree noob
swimmingfreelambdafreq wrote:-Is there a difference in seats between the 1984 and 1985 Spree's? yes i think so
-If you buy a big bore piston and gasket kit, is that all you need? As in, can everything else be stock and it will all work? why are you putting a bbk???
Thank you, Aaron.
handicap (dyslexia)
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
looking for
se50 crank...
SpreJunk 87elite in a spree body
ruckus variator , 3.5 tire , 1500 drive face spring , a 64 bbk ,
8 gram rollers, stock carb , after market air filter and 105 jet
-
- Noob
- Posts: 14
- Joined: Mon Jun 22, 2015 3:43 am
- Location: Central NJ
Re: 2 quick questions from a spree noob
uhhh?swimmingfree wrote:swimmingfreelambdafreq wrote:-Is there a difference in seats between the 1984 and 1985 Spree's? yes i think so
-If you buy a big bore piston and gasket kit, is that all you need? As in, can everything else be stock and it will all work? why are you putting a bbk???
Thank you, Aaron.
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: 2 quick questions from a spree noob
All spree seats are the same
Big bore kits require that you do some work to the head and re jet the carb to work correctly.
Big bore kits require that you do some work to the head and re jet the carb to work correctly.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Noob
- Posts: 14
- Joined: Mon Jun 22, 2015 3:43 am
- Location: Central NJ
Re: 2 quick questions from a spree noob
Alright, thank you!Trafficjamz wrote:All spree seats are the same
Big bore kits require that you do some work to the head and re jet the carb to work correctly.
Edit: I assume that by head you mean the gasket head?
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: 2 quick questions from a spree noob
Greetings:
Not the gasket, but the head itself must be carved bigger or extra 48mm gaskets used to enlarge the combustion chamber. Otherwise compression goes too high and the engine will overheat. A lot more mixture to compress.
Not the gasket, but the head itself must be carved bigger or extra 48mm gaskets used to enlarge the combustion chamber. Otherwise compression goes too high and the engine will overheat. A lot more mixture to compress.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH