I had to grind a little bit at the bolt holes to clear the brake caliper from the back. I used spacer to have it in the correct position for the wheel to spin freely without hitting any components. I had to find the correct disc to fit the kymco hub with enough clearance for the wheel to clear brake caliper. Lots of time playing with how it will fit. Last thing is to install the brake line and left master cylinder.hothatch85 wrote:What modifications were made to the hub?
My 1995 Honda Elite SR modded!
Moderator: Moderator
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
So I got the rear discs set up working properly, and picked up a genuine arrow pipe from hawaii. Didn't tell my wife what it actually costs.... But I love it! Check out the videos and some pictures.
Arrow pipe costs an arm and a leg lolz
Arrow pipe costs an arm and a leg lolz
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
Here are the videos. Sorry no videos of arrow pipe running yet. That's all the time I have for this trip home until next time.
Without wheel on
https://youtu.be/LW3bANYDxNw
With wheel on spinning.
https://youtu.be/kwHxYe7gWcI
Without wheel on
https://youtu.be/LW3bANYDxNw
With wheel on spinning.
https://youtu.be/kwHxYe7gWcI
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
-
- CB900F
- Posts: 1485
- Joined: Wed Mar 18, 2015 11:49 am
- Location: usa
Re: My 1995 Honda Elite SR modded!
Freaking awesome work!
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
Everything is bolted and running took it around the a few blocks. Front and back brakes are crazy strong. The bike stops unbelievable fast, just a tap and you could be sliding or drifting is also fun too. Lolz
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
Thank you sir means a lot!!1man8scoots wrote:Freaking awesome work!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
Re: My 1995 Honda Elite SR modded!
This thing is awesome! I love the blue paint. Looks really good. I also love how the front end sits being that low. Looks great. Couple quick questions
What is the webbed plastic thing that the exhaust bracket is mounted to?
What are you using for the rear hub?
Are you going to leave the Vapor mounted on the side? Or put it back in how you had it with the carbon fiber?
What is the webbed plastic thing that the exhaust bracket is mounted to?
What are you using for the rear hub?
Are you going to leave the Vapor mounted on the side? Or put it back in how you had it with the carbon fiber?
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
The web thing I think you are talking about might be the exhaust wrapping? and the mount is extended by a rod I got at the hardware store. And the other smaller bolt is connect to the lower shroud fan cover. I am using the Kymco rear hub. And the vapor will sit on the handle bar because I have a Dio Live headset. I didn't really like the other carbon fiber headset it was a from Chinese scooter.johnny248 wrote:This thing is awesome! I love the blue paint. Looks really good. I also love how the front end sits being that low. Looks great. Couple quick questions
What is the webbed plastic thing that the exhaust bracket is mounted to?
What are you using for the rear hub?
Are you going to leave the Vapor mounted on the side? Or put it back in how you had it with the carbon fiber?
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
Re: My 1995 Honda Elite SR modded!
This is the thing I was referring to
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
Re: My 1995 Honda Elite SR modded!
Omg I am am idiot. I just zoomed in and realized that is the tread of the tire hahaha nevermind I thought it was some sort of web-reinforced plastic piece.
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
It's all good, everything is very tight in that area, I can barely get the tire on without rubbing, had to grind the case a bit. Im so excited for tomorrow to just ride and tune it.
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
Re: My 1995 Honda Elite SR modded!
Have fun! Beautiful scoot!
..:ÔÇó┬░ 1994 HONDA ELiTE S SA50P - Original Owner ┬░ÔÇó:..
~UNDER CONSTRUCTiON~
~UNDER CONSTRUCTiON~
- Xxbeejay45xx
- Elite
- Posts: 420
- Joined: Thu Jun 19, 2014 7:13 pm
- Location: Kansas
Re: My 1995 Honda Elite SR modded!
Thank you very much sir!!
95 Elite SR af16e
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel
72cc Polini Corsa
28 Oko Carb 58/144
Ported intake
ZX Trans
Polini vari, clutch, springs
5.5 rollers
Malossi crank , CDI
Genuine Arrow pipe
Front and Rear disc brakes
Dio Live headset
Stretch and fatty rear wheel