Spree Carb passage verification
Moderator: Moderator
-
- Board Supporter
- Posts: 772
- Joined: Fri Feb 28, 2014 6:35 am
- Location: Tennessee
Spree Carb passage verification
If I stick a wire in this passage hole should it come out of the tube below it?
Or be visible from the mixture screw hole?
Thanks in advance!
-
- Elite
- Posts: 392
- Joined: Mon Feb 01, 2016 11:04 pm
- Location: beaverton, or
Re: Spree Carb passage verification
I havnt personally cleaned one of those carbs, but other stock honda carbs i have cleaned, elite, express, etc it seemed the hole right angles so wire wont go all the way thru. But thats def the best way to clean it. Or at least loosen up the old dirt, go from bowl up also, then shoot carb cleaner to clear it, or soak it..
2000 Honda SR (purple swurp)
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
corsa
naruku
polini 21 cp 36/106 pod filter
polini vari 5.5 gram
zx trans
Polini evo2 clutch/bell yellow springs (slacked) yellow contra
Yasuni C16
stock crank/gears=wheelie machine
70 mph/12,470 rpm Trail tech vapor verified
Re: Spree Carb passage verification
Is that the idle passage?
If so, you'll not get a wire through it without destroying the jet.
If so, you'll not get a wire through it without destroying the jet.
Admin, Hondaspree.net
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
Buy air filters and gaskets here (Ebay): http://stores.ebay.com/noiseguysstore
Buy air filters and gaskets here (Amazon): www.amazon.com/shops/spreepower
Buy a t-shirt here: https://teespring.com/stores/spree-powersport-products
-
- Board Supporter
- Posts: 772
- Joined: Fri Feb 28, 2014 6:35 am
- Location: Tennessee
Re: Spree Carb passage verification
Thank you both!noiseguy wrote:Is that the idle passage?
If so, you'll not get a wire through it without destroying the jet.
NG, You have just earned yourself another filter purchase when I need one.