Honda Nifty 125cc
Moderator: Moderator
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Honda Nifty 125cc
haha sorry yes fender
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Honda Nifty 125cc
NZHonda wrote:Some fresh pics. Frame and wheels painted. Other forks installed. Slowly getting there. Did I mention I got Dio alloys! They look great.
The fender was made by the previous owner by chopping and glassing the old one. Thanks to Paulpauly7's father we now have a nice mould to reproduce them....
SWEET RIDE! VERY NICE WORK.
Life's a trip enjoy the ride.
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
94 elite SR, 86 spreedio, polini corsa, keli variator, 8.4, jet. speed 65 mph
spreedio video. https://www.youtube.com/watch?v=BZr46_-douQ
Re: Honda Nifty 125cc
The fender was actually a mould from a Suzuki Mollet fender widened and reshapped, to a point where it looked nothing like a Mollet fender, but the carbon needed a lot of sanding and prep work before a high gloss top coat to make the carbon fibre pop, but yea it wasnt perfect.
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: Honda Nifty 125cc
the mould had alot of work but now a smooth clean fiberglass remake can be done
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
Re: Honda Nifty 125cc
yea it looks good , wish I nailed that one.paulpauly7 wrote:the mould had alot of work but now a smooth clean fiberglass remake can be done
Re: Honda Nifty 125cc
Hi all,
I can say that this project isn't going to happen! The engine parts, dio alloys and other good bits have been used for my other Honda scooters. We are finally going to get te 125cc stroker engine sorted and put it into a DJ1RR.
The disk brake went into my Dio ZX project.
Love me some dio alloyed af18e powered scooters.
I can say that this project isn't going to happen! The engine parts, dio alloys and other good bits have been used for my other Honda scooters. We are finally going to get te 125cc stroker engine sorted and put it into a DJ1RR.
The disk brake went into my Dio ZX project.
Love me some dio alloyed af18e powered scooters.
Honda AF28 Dio ZX - Malossi 72cc
Honda DJ1R project
Honda DJ1R project
Re: Honda Nifty 125cc
Good to see you check in NZHonda.
hope you are well and enjoying the weather, assuming it is fair now.
I have a new NZ friend who has taken a wife and residence here now.
His name is Blake, but we call him "Sweet as"
Keep coming by the board and sharing news, and of course PIX.
Cheers and happy new year...motor...
hope you are well and enjoying the weather, assuming it is fair now.
I have a new NZ friend who has taken a wife and residence here now.
His name is Blake, but we call him "Sweet as"
Keep coming by the board and sharing news, and of course PIX.
Cheers and happy new year...motor...
RideRed
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"
<Gyro S><MB5><Honda Navi><Helix><Sym Wolf><Yamaha Razz><Honda CH150 Deluxe>
"Live Large - Ride Small"