I recently took my carb off to clean it and I started putting it back on today. I bolted the carb on and then screwed in the throttle slide. The throttle (twist handle) does not seem to turn like it did before, and it does not spring back, Do I need to oil the carb slide? Thanks.
abalmer wrote:when it is in there correctly how is it supposed to look?
You will know because you wont be able to screw the cap on all the way if its installed incorrectly. It should tighten by hand with no tension, if you feel tension, turn the slide 180 degreees and you should be good.
1987 Spree 4400 miles 32 mph stock with my 285lb ***