Dio Gears in a SE50?
Moderator: Moderator
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
Dio Gears in a SE50?
ok guys, i wanna know y people say this wont work? does anyone know y? whats the differences between the blocks? (SE50, SA50)
~2004 Geely Fashion~
dude. Check this out...
this is the SA50 block thing. As far as i know, 93 and under SA50s were the same as the SE50s (could be wrong)
Now when you buy a gear kit you dont get everything. Just the two sprokets. So im theory, Just find one some parting out a dio motor. Snag all the inerds of the gearing. Then buy a gear kit. And it should mount in and go.
I might try this on my 92. That and port the case so it will take a 72cc bore kit.
this is the SA50 block thing. As far as i know, 93 and under SA50s were the same as the SE50s (could be wrong)
Now when you buy a gear kit you dont get everything. Just the two sprokets. So im theory, Just find one some parting out a dio motor. Snag all the inerds of the gearing. Then buy a gear kit. And it should mount in and go.
I might try this on my 92. That and port the case so it will take a 72cc bore kit.
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
ok guys, i have my dio gears. ordered them from VT cycles friday. i did some research. these gears will work. wait a few more days till i take some pics. i will be going into a lot of detail of just how im making these gears work. ive got a base line of what my aero runs now. 43mph flat.
~2004 Geely Fashion~
-
- BMX
- Posts: 26
- Joined: Tue May 27, 2008 6:41 pm
If it works, I think I'll cry a little.dukemartini wrote:Holy Sh#t do I hope this works!Dac wrote:FOR REAL!jstone wrote:d***, if this works it will change life as we know it!
It would change everything!
"This whole thing is a travesty and a sham and a mockery! It's a traveshamockery!"
"No making up words sir."
"Burgleflickle!"
"No making up words sir."
"Burgleflickle!"
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
ok, so the dio axle is the exact same as the SE50. no problems there. however, i call it the idler gear needs some machining. this gear has splines on it, and the shaft itself is a little longer. all im ganna do is shorten the shaft, and have the splines cut down just enough so i can have the gear pressed on. thats it. i will post pics once the gear is machined.
~2004 Geely Fashion~
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
1. the before look. stock gears on the right, dio gears on the left.
2. u can c just how much longer the shaft is on the dio gear on the right.
3. in this pic, this is where i have to have the splines machined down, so i can have the gear pressed on to the shaft.
4.on the axle shaft, the stock gear has splines with 2 snap rings. the dio gear will have to be welded on. im not exactly sure if my buddy will weld it, or do something else.
5. the dio gears in the SE block.
6. once the one gear gets pressed on, i should be good to go.
2. u can c just how much longer the shaft is on the dio gear on the right.
3. in this pic, this is where i have to have the splines machined down, so i can have the gear pressed on to the shaft.
4.on the axle shaft, the stock gear has splines with 2 snap rings. the dio gear will have to be welded on. im not exactly sure if my buddy will weld it, or do something else.
5. the dio gears in the SE block.
6. once the one gear gets pressed on, i should be good to go.
~2004 Geely Fashion~
you do realize something right?
YOUR CHANGING THE WAY THINGS WORK!
Your like changinging the fact that SE50s dont have gears! Why are you making the dio seem less cool?!?!?!
BTW what is the gear ratio you are using?
YOUR CHANGING THE WAY THINGS WORK!
Your like changinging the fact that SE50s dont have gears! Why are you making the dio seem less cool?!?!?!
BTW what is the gear ratio you are using?
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
no dude im just joking arround. But you are changing everything.
"being im not a big dio fan anyway" All i got to say is own one.
But no dude. I really hope this works. I really would love to see a member of this board to be the big ground breaker.
"being im not a big dio fan anyway" All i got to say is own one.
But no dude. I really hope this works. I really would love to see a member of this board to be the big ground breaker.
"Its not what you ride, its that you ride"
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
1996--------Honda Elite S-
1991--------Tomos Targa-
And a Bunch of other bikes.
- chevyguyjay
- CB900F
- Posts: 1169
- Joined: Sat Feb 03, 2007 5:09 pm
- Location: Lincoln Park, MI.
- Contact:
-
- CBR1000RR
- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
Hah I wouldn't go that far.. dio blocks will reign supreme in the honda realm me thinksKenny_McCormic wrote:By doing this the price of SE50 motors will SKYROCKET!!!
But this is a step! My friend has an 87 SE50 and would be very interested in something like this, he's trying to overhaul his elite but stay 50cc and catch up mine lol
With these gears he'll be almost there.
projects galore
-
- BMX
- Posts: 26
- Joined: Tue May 27, 2008 6:41 pm
I'll buy for surejstone wrote:Once you and your buddy get everything worked out, you should mass order some gears and go in to production. I think it would be a BIG money maker just based on the amount of people that visit this site asking for gears.
"This whole thing is a travesty and a sham and a mockery! It's a traveshamockery!"
"No making up words sir."
"Burgleflickle!"
"No making up words sir."
"Burgleflickle!"