Trying to get your Spree/Elite to run, or run better? Post your questions here.
Moderator: Moderator
ferchja
Spree
Posts: 187 Joined: Mon Jul 23, 1973 10:24 am
Location: Racine, WI
Post
by ferchja » Thu Jul 07, 2005 11:52 pm
I am going to stencil the spree and honda logo on the side of the spree.
Would someone be able to take a straight on side pic of the decal The 85 had the top one of the pic but I would take either.
The pic off partfish is to grainy to blow up to trace to a stencil.
Thanks
Last edited by
ferchja on Sat Jul 16, 2005 10:26 am, edited 1 time in total.
Jeremy Ferch
1985 Spree (NQ50) - Mid restoration
Farfignugin
Veteran OG
Posts: 489 Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY
Post
by Farfignugin » Fri Jul 08, 2005 4:22 pm
What sticker do you need a picture of?? The one on the rear cover (the Spree logo)??
ferchja
Spree
Posts: 187 Joined: Mon Jul 23, 1973 10:24 am
Location: Racine, WI
Post
by ferchja » Fri Jul 08, 2005 8:36 pm
I need the rear decal under the seat that looks like the above. The key is to get the camera directly above it, not close but so that there is as little curve from the body in the decal. Since I will be blowing it up a bit, any curve from the body will distort the lines.
Thanks in advance.
Jeremy Ferch
1985 Spree (NQ50) - Mid restoration
Farfignugin
Veteran OG
Posts: 489 Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY
Post
by Farfignugin » Mon Jul 11, 2005 1:48 pm
If you could give me ur e-mail address i can go get picture now and send it to you.
thanks
Farfignugin
Veteran OG
Posts: 489 Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY
Post
by Farfignugin » Mon Jul 11, 2005 2:24 pm
will send pic
hope 6 megapixel is high res enough?
Farfignugin
Veteran OG
Posts: 489 Joined: Mon Jul 23, 1973 10:24 am
Location: Unadilla, NY
Post
by Farfignugin » Mon Jul 11, 2005 4:52 pm
ok, thanks, i mailed them to you, hope you like them and hope that they are of use to you!
ferchja
Spree
Posts: 187 Joined: Mon Jul 23, 1973 10:24 am
Location: Racine, WI
Post
by ferchja » Mon Jul 11, 2005 11:18 pm
Got them. Thanks they will work.
Jeremy Ferch
1985 Spree (NQ50) - Mid restoration