Spree info
Moderator: Moderator
- Speedway_Kartworks
- Noob
- Posts: 12
- Joined: Sat May 02, 2009 10:18 pm
- Location: Speedway,IN
Spree info
Ok, new to the forum, had a spree back in the late 80's , I have just aquired another spree. I want to do some upgrades on the engine, things like bigger cylider, aftermarket exhaust, bigger carb, gearing and so on. I know some might say just get a bigger bike but I like to tune on "toys".I find stuff on ebay for Honda dio, what is this? Will these products fit on my spree, if not where can I get some aftermarket tuning products, and I dont want to change engines, although the one someone else did on these forums sounds like it will rip, just want to take what I have and make it a little quicker.
Thanks in advance,
MG
Thanks in advance,
MG
-
- CBR1000RR
- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
No spree performance parts exist, port it out(raise the exhaust port 1 ring width), shave the head, port the intake manifold(it flows horribly), weld up a custom expansion chamber pipe.
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
- burnt_toast
- Veteran OG
- Posts: 3592
- Joined: Sat Jul 31, 2004 8:00 pm
- Location: Atlanta, GA
correction there appears to be a bore kit on ebay for the spree, check this thread out:
http://www.hondaspree.net/phpBB2/viewtopic.php?t=9176
http://www.hondaspree.net/phpBB2/viewtopic.php?t=9176
projects galore
- Speedway_Kartworks
- Noob
- Posts: 12
- Joined: Sat May 02, 2009 10:18 pm
- Location: Speedway,IN
-
- CBR1000RR
- Posts: 4957
- Joined: Sun Apr 16, 2006 11:51 am
- Location: Southern Michigan
Dremel a rings worth off the top, there is no sleeve, its a solid cast iron jug.Speedway_Kartworks wrote:well, that answers that. Thanks Kenny. How are you rasing the exhaust port? by base gaskets or are you moving the sleeve?
Thanks,
MG
I am not a mechanic, nor do I play one on TV. Actually my advice is probably worth slightly less than what you pay to view it.
- Speedway_Kartworks
- Noob
- Posts: 12
- Joined: Sat May 02, 2009 10:18 pm
- Location: Speedway,IN