Project Tempest (SpreeTypeR)

This is the place to post your scooter builds; everything from stock Spree restoration to water-cooled drag bikes.

Moderator: Moderator

User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3591
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Project Tempest (SpreeTypeR)

Post by burnt_toast »

Here starts the journey of my craziest scooter build yet! Starting off with an '86 Honda Spree picked up in dirty condition with all parts there and intact, non running of course.

My goals are to build up to full race spec with magic secret sauce within TWO MONTHS! It's a harsh deadline, with college fulltime and other priorities but an October scooter ride and my scooter passion drive me. Wish me luck guys :o

ImageImage Image Image
projects galore :nerd:
User avatar
wiguy05
Elite
Elite
Posts: 568
Joined: Sat Aug 09, 2008 8:48 pm
Location: Janesville, WI

Re: Project SpreeTypeR

Post by wiguy05 »

Dude, swap in a DIO!

But really, a DIO motor and some Eve Smile panels.....mmmmmmm, me likey :twisted:
2006 Sachs Madass
- FTP 140cc Kit
- Stock 125cc undertail exhaust

2006 Xkeleton Trickster
- Lifan 90cc auto
User avatar
bradthreee
Board Supporter
Board Supporter
Posts: 2142
Joined: Tue Sep 12, 2006 4:20 pm
Location: MARS...

Re: Project SpreeTypeR

Post by bradthreee »

Do a front disc swap. I'm interested in seeing how its done and would likely want to do it also!
User avatar
tru72
CB900F
CB900F
Posts: 1045
Joined: Wed Aug 01, 2007 3:43 am
Location: HaWaii
Contact:

Re: Project SpreeTypeR

Post by tru72 »

nah front disc swap , flashy but of no use, way to heavy..
most all drag strips have so much run off youll slow down easy with that spree front end
pmed you yan.
let me know what u need
aloha
D

here my new paint job!
Image
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3591
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Re: Project SpreeTypeR

Post by burnt_toast »

tru72 wrote:nah front disc swap , flashy but of no use, way to heavy..
most all drag strips have so much run off youll slow down easy with that spree front end
pmed you yan.
let me know what u need
aloha
D

here my new paint job!
Image
that faka is MEAN as *!!!! Really like the new paint Darin. ooh la la shiny :P

but yes, tru72 is certainly right, so no disk setups on this one brad. keep in mind my build will be for nearly sole dragstrip purpose with a slight twist ;)

wiguy swap in dio are u crazy? gonna go all out with spree powa.. LMAO :lol:
projects galore :nerd:
User avatar
bradthreee
Board Supporter
Board Supporter
Posts: 2142
Joined: Tue Sep 12, 2006 4:20 pm
Location: MARS...

Re: Project SpreeTypeR

Post by bradthreee »

That skinny tire on the Spree front end will make it hard to keep control at those high speeds. I know, just use a wider tire right? Well not too sure how wider you can go in between the gap on the stock Spree forks. Just a thought...
toboggan
Elite
Elite
Posts: 758
Joined: Sat Mar 21, 2009 2:55 pm

Re: Project SpreeTypeR

Post by toboggan »

This is gonna be sweet Yan!! Can't wait to see it when it's finished!

On the other hand... That paint job on that elite is amazing. what kind of paint is it, and why with the longer motor mount? Just wondering.
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3591
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Re: Project SpreeTypeR

Post by burnt_toast »

bradthreee wrote:That skinny tire on the Spree front end will make it hard to keep control at those high speeds. I know, just use a wider tire right? Well not too sure how wider you can go in between the gap on the stock Spree forks. Just a thought...
Brad good call, that was my first concern and what I talked to tru72 about. He has had success with the 2.5 tire at speeds of 80mph so I will stick to it for now, OR maybe go with something just a lil bigger depending on what tires we have in stock at our shop

toboggan wrote:This is gonna be sweet Yan!! Can't wait to see it when it's finished!

On the other hand... That paint job on that elite is amazing. what kind of paint is it, and why with the longer motor mount? Just wondering.
thanks toboggan :) and to answer for tru the longer mount helps keep the front end down more when drag racing
projects galore :nerd:
toboggan
Elite
Elite
Posts: 758
Joined: Sat Mar 21, 2009 2:55 pm

Re: Project SpreeTypeR

Post by toboggan »

ooh. i see.

well i just have to say, that elite looks absolutely amazing!!

How far are you on your type R burnt?
User avatar
tru72
CB900F
CB900F
Posts: 1045
Joined: Wed Aug 01, 2007 3:43 am
Location: HaWaii
Contact:

Re: Project SpreeTypeR

Post by tru72 »

wel just hit me up on messenger yan
the fastest i have clocked with my bike is 84, but thats during testing, not at the track. You must think of the whole balancing act to keep it stable. That motor mount is like my 3rd one. the first 2 were just too short for my seating positioning.
heres what i have been doing this week for the next race
Image
User avatar
Spreetard
Elite
Elite
Posts: 817
Joined: Mon May 04, 2009 7:28 pm
Location: Manistee, Mi

Re: Project SpreeTypeR

Post by Spreetard »

bradthreee wrote:Do a front disc swap. I'm interested in seeing how its done and would likely want to do it also!

i know it's not needed for THIS project, but i am also very curious as to what existing disk parts are used in the adaption to the spree. my tiny drum brakes give me the heebie-jeebies in panic stop situations. i want to try to do the conversion this winter, but would like to not just jump in blindly...
Ol' Red
1987 Spree, 42mph on 49cc (gps)
Broken...
Spreeio
1987 Spree
With af16e powah!!!!
77cc Malossi Ministroker, 24mm oKo, 30mm V8 pipe.
Chinabike 3000! GY6 clone daily driver/ beater machine bought for $75!
User avatar
bradthreee
Board Supporter
Board Supporter
Posts: 2142
Joined: Tue Sep 12, 2006 4:20 pm
Location: MARS...

Re: Project SpreeTypeR

Post by bradthreee »

I've been putting alot of thought into the swap and I really dont think it'll be that hard. It'll involve cutting the stem off of the stock Spree forks and reusing it on a triple tree or Dio forks. Probably wont be able to reuse the Spree fender but I remember seeing one swap that used what I beleive was a monkey fender. The headset should be reusable as long as you keep the stock handlebars. Just a thought those ruckus guy do the Dio front setup and I beleive they have carbon fenders available.

BTW Spreetard did the engine shroud get to you ok?
User avatar
Videonut
Spree
Spree
Posts: 256
Joined: Sun May 03, 2009 12:48 am
Location: Ridgefield washington

Re: Project SpreeTypeR

Post by Videonut »

Very cool burnt

are you going to post more pics? this little pic of the nos is cool but we need more......:))
videonut
86 spree with honda cb750 rear shock
xr50 knobby tires, 32mph on slightly restricted craftsman air filter.
Scooter was stolen so i have to make it look good again
User avatar
burnt_toast
Veteran OG
Veteran OG
Posts: 3591
Joined: Sat Jul 31, 2004 8:00 pm
Location: Atlanta, GA

Re: Project SpreeTypeR

Post by burnt_toast »

toboggan wrote:ooh. i see.

well i just have to say, that elite looks absolutely amazing!!

How far are you on your type R burnt?

Looks JUST like in original pics, but with a lil more air in the tires :lol:

been busy and just haven't gotten to her yet, also sourcing parts in meantime
projects galore :nerd:
toboggan
Elite
Elite
Posts: 758
Joined: Sat Mar 21, 2009 2:55 pm

Re: Project SpreeTypeR

Post by toboggan »

burnt_toast wrote:
toboggan wrote:ooh. i see.

well i just have to say, that elite looks absolutely amazing!!

How far are you on your type R burnt?

Looks JUST like in original pics, but with a lil more air in the tires :lol:

been busy and just haven't gotten to her yet, also sourcing parts in meantime

Very nice, that thing looks like a beast!! :shock:
Post Reply