Pass, (for now), but it IS good to know there are some options on the filter side for one to tweak it just right. I just wanna be fair and non biased and use what I got. I did Email Shawn to tell him if needed or wanted I do have a jet source available and will tell him filter source as well, thanks.noiseguy wrote:You need some configurations to test. I'll throw in; since I produce filter elements, I can make some different configurations from material on hand. Stock Spree element is 80 PPI and 15mm thick.
I can produce a 80 PPI and 10mm thick element. This should cut some restriction on airflow, but I've no idea if it'll improve things.
Also, a 20 PPI and 15mm element, which is basically just a hair and sawdust screen... not streetable, but a step better than no element.
LMK if interested. I'll make/ship them to you for free if you post up results here.
I've written enough crib notes and scratched off too many variables all ready. The very first thing I handed them, was the instructions for the BBK.. Got an initial yes and no on a couple of the things it asked for. With or without pump, with or without airbox/ pod. 32:1 for break in? 50:1 post break in? Could a too saturated oiling be affecting lean conditions at WOT? Not that I am in anyway trying to insult anybody's already established means of operating the new BBK, and no disrespect to Taz for his AWESOME kit.