high end set up help?????
Moderator: Moderator
-
- Noob
- Posts: 11
- Joined: Fri Sep 30, 2011 2:06 am
- Location: oahu grown
high end set up help?????
Im looking a high end race set up to go 80mph. Right now in hitting 70mph with 36gram weights(7g,5g), 2000rpm center spring, 4000rpm clutch springs..any help is appreciated i want my bike to hit 80mph but i cant find the setup
Tell me a set up that will make me hit 80mph(high end)
spring?weights?tricks?
89 elite
my weight is 150lbs
my set up:
72 contezza(ported exhaust and boost)
sef ministroke crank
af16(ported boost, matches with contezza boost)
stock mag and stator
6.7:1 straight cut gears
daytona 2 ramp and pulley
kelli heavy clutch
zx trans ncy torque plate
zx belt
72 arrow pipe
30mmOKO carb
come on forums give me something hammah
Tell me a set up that will make me hit 80mph(high end)
spring?weights?tricks?
89 elite
my weight is 150lbs
my set up:
72 contezza(ported exhaust and boost)
sef ministroke crank
af16(ported boost, matches with contezza boost)
stock mag and stator
6.7:1 straight cut gears
daytona 2 ramp and pulley
kelli heavy clutch
zx trans ncy torque plate
zx belt
72 arrow pipe
30mmOKO carb
come on forums give me something hammah
TOPSHOTTAH
-
- Goped
- Posts: 71
- Joined: Sun Sep 12, 2010 3:46 am
Re: high end set up help?????
you need bigger displacement and a counter weight crank to match a top end pipe rpm> heavier weights and 7-1 or lower gears
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: high end set up help?????
what rpm are you hitting now?
What belt are you using?
Maybe a polini for ruckus variator would get you a few more mph.
Can we see pics of your current setup?
What belt are you using?
Maybe a polini for ruckus variator would get you a few more mph.
Can we see pics of your current setup?
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
Re: high end set up help?????
You also need BIG MONEY!
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
- fastplastic
- CB900F
- Posts: 1161
- Joined: Tue May 11, 2010 7:37 pm
- Location: Manistee, MI
Re: high end set up help?????
or a diet lol
-
- Noob
- Posts: 11
- Joined: Fri Sep 30, 2011 2:06 am
- Location: oahu grown
-
- Noob
- Posts: 11
- Joined: Fri Sep 30, 2011 2:06 am
- Location: oahu grown
Re: high end set up help?????
6.7:1 is lower than 7:1 gears...the sef mini is a full counterweight crank...Bear help me out..I have money..I want to build my contezza...
TOPSHOTTAH
Re: high end set up help?????
Delete
Last edited by CAPT on Thu Aug 10, 2017 2:13 pm, edited 1 time in total.
Re: high end set up help?????
Numerically lower but gear ratios work backwards and a smaller number is a higher ratio.topshottah 94 wrote:6.7:1 is lower than 7:1 gears...the sef mini is a full counterweight crank...Bear help me out..I have money..I want to build my contezza...
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: high end set up help?????
Have you switched the primary gears yet? if not 6.9 to 1 should gain you at least 10mph
1986 Spree/ Eve af16 swapped 65cc Prodigy vari 8g 9:1 Ruima gears
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
21mm OKO 42/100 32:1 45mph kymco zx exhaust
1994 Elite S 17.5mm Arreche, Daytona reeds, SEF ramp, pump plugged
1987 Elite SE50 af16 swapped
1989 Elite E SB50p
2003 Yamaha Zuma
- Trafficjamz
- CBR1000RR
- Posts: 5353
- Joined: Tue Jul 14, 2009 7:53 pm
- Location: Eastlake, MI
- Contact:
Re: high end set up help?????
This chart assumes you have a .85:1 ratio at the variator and a 90/90 tire.
With 7.5 gears 80mph would need rpms above 11k
6.3 gears would only require 9k or so, but your 72cc bore might not make enuff power too push it there.
With 7.5 gears 80mph would need rpms above 11k
6.3 gears would only require 9k or so, but your 72cc bore might not make enuff power too push it there.
new best 1/8th mile time 9.647 seconds @67.155 mph 310lbs total weight
-
- Noob
- Posts: 11
- Joined: Fri Sep 30, 2011 2:06 am
- Location: oahu grown
Re: high end set up help?????
using that chart..i thought of this set up
1500 center spring
4000 clutch springs
with 42gram weights
this will give me about 9500 rpm
pushing my gears to about 75mph..
but i still need more power to get me to 80mph
iv seen it done here in hawaii with a 72..i just need more power
any advice on building power for my 72
im thinking putting a rotor kit to give me more rpm, but
i know for a fact that im going to have to change my springs
and weights to be in balance with the high rpm of the rotor kit.
any advice..??
mahalo..
mahalo means thank you in hawaiian
1500 center spring
4000 clutch springs
with 42gram weights
this will give me about 9500 rpm
pushing my gears to about 75mph..
but i still need more power to get me to 80mph
iv seen it done here in hawaii with a 72..i just need more power
any advice on building power for my 72
im thinking putting a rotor kit to give me more rpm, but
i know for a fact that im going to have to change my springs
and weights to be in balance with the high rpm of the rotor kit.
any advice..??
mahalo..
mahalo means thank you in hawaiian
TOPSHOTTAH
Re: high end set up help?????
Only if he has enough horsepower, which is unlikely.Mystic wrote:Have you switched the primary gears yet? if not 6.9 to 1 should gain you at least 10mph
Bear 45/70
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
'83 Aero 80 X 3
'84 Aero 80 X 3
'85 Aero 80
'84 Aero 125 X 2
'84 Aero 125
'84 Aero 125 X 2
'85 Aero 50
'85 Spree
Re: high end set up help?????
Well I've definitely never hit 80, but 1st thing I'd change is that 2k center spring. 1500 like you were thinking is good, I'd even try a 1k center spring. No need for 2k spring if you weigh 150lbs.
In 2040 they say we're going away
We could never let them control
Hawaiian man, take back your hawaiian land
We could never let them control
Hawaiian man, take back your hawaiian land
Re: high end set up help?????
I would find a set of speed rated tires before you kill yourself! I've only found 62mph tires out there....just sayin!
94 elite 50s
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears
----
66cc bbk
118jet/Pre-Mix32:1
1"uni-filter,Keli 9g
1k center,8.44 gears,ZX Trans
V8 Pipe,IRC MB38 80/90 tires
H4 H.I.D
94 elite 50sr
-----
50mm BBK,105jet
1" Uni-Filter,8:44gears