intake port
Moderator: Moderator
-
- Noob
- Posts: 15
- Joined: Wed Nov 16, 2011 12:11 pm
- Location: bobylon killah
intake port
as i was building my 120 stroker. i was porting my intake and i thaught to my self, will it be better if i cut out the line in between the intake and make it bigger.
so instead of having 2 squares in the intake. will it be better to cut the thing in the middle of the intake so it makes the intake bigger? will it be better?
so instead of having 2 squares in the intake. will it be better to cut the thing in the middle of the intake so it makes the intake bigger? will it be better?
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
Re: intake port
Why dont you give it a try and let us know how it goes
Haha
Haha
ua mau ke 'ea o ka aina i ka pono o hawaii
Re: intake port
I don't know....weaker, yes.FullRace808 wrote:will it be better?
2001 Honda Elite
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
1995 Yamaha Jog
1994 Yamaha Axis
I can't believe
that cop put me
in the backseat
when I clearly
called shotgun.
Re: intake port
You don't want to cut that brace out. It holds the top section from flexing when it gets hot. Plus its only about 1mmto1.3mm thick anyways. Why risk it leaking on top for that extra 1to1.3mm. Not worth it.
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
- Wheelman-111
- Moderator
- Posts: 11325
- Joined: Wed Oct 22, 2008 5:09 pm
- Location: Deepinnaharta, Texas
Re: intake port
Greetings;
Someone else here ax-ted that question about 2-3 years ago. A Respected Forumista replied:
nnnNOOOOOOOOoooooooo
Evidently someone (or several) thought the same and lived to regret cutting out that little brace. It is a pretty long floor right where the hot part of the case meets the cold. Don't do it.
Someone else here ax-ted that question about 2-3 years ago. A Respected Forumista replied:
nnnNOOOOOOOOoooooooo
Evidently someone (or several) thought the same and lived to regret cutting out that little brace. It is a pretty long floor right where the hot part of the case meets the cold. Don't do it.
Wheelman-111
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Most of my money is spent on scooterparts. The rest is just wasted.
"ISO": '03 Vespa ET4 Malossi187 74MPH
Flash 9: 2001 Elite SR Contesta 72 ZX Tran, 9:1 Gears, Stock Airbox/Carb/Pipe 58.8 MPH
Punkin: 2010 Vespa/Malossi S78, 61MPH
Re: intake port
bakaracer wrote:You don't want to cut that brace out. It holds the top section from flexing when it gets hot. Plus its only about 1mmto1.3mm thick anyways. Why risk it leaking on top for that extra 1to1.3mm. Not worth it.
- Dio89Elite
- Elite
- Posts: 701
- Joined: Wed Feb 01, 2012 3:55 pm
- Location: 50th state
Re: intake port
no
and can't explain it any better than what bakaracer already did. =)
(thanks bakaracer)
and can't explain it any better than what bakaracer already did. =)
(thanks bakaracer)
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
- paulpauly7
- CB900F
- Posts: 1945
- Joined: Tue Feb 21, 2012 6:57 pm
- Location: nz
Re: intake port
King you tell other people not to be a D I C K in your threads and here you are doing the same thing whats up with that?
86 Nifty Fifty (spree)
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
ZX disk brake
Kitico 120kmh speedo
AF18 ZX ported
Polini corsa
Malossi crank
CTmani
24mmOKO
40pilot118main
Scorpion pipe
8.44 to 1
Michelin s1
71.3mph
92 yz125, 94 crm250
- kingkamehameha
- CB900F
- Posts: 1215
- Joined: Sat Apr 16, 2011 1:11 pm
- Location: kailua kona
Re: intake port
Why do you want to build dio 120, it because you want smoke, spank animo jog motor? Come on. Get real!
Re: intake port
here is an example of a dio smoking and spanking a animo jog style motor. in fact this is a piaggio watercooled 15k rpm 19hp+ motor getting spanked by yours truely on a dio powered 87 eliteveedubh20 wrote:Why do you want to build dio 120, it because you want smoke, spank animo jog motor? Come on. Get real!
http://www.youtube.com/watch?v=JWYboalo ... detailpage
ON board the derbi piaggio motor bike
http://www.youtube.com/watch?v=QhlA0McbYB0
on board a vespa with a 225cc lambretta motor
Nothing like getting stroked!
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Thanks to my sponsors
Nos Energy Drinks,themopedcompany.com,nwautoevents.com,Cycle Gear
90 honda dio sp 72cc
87 elite 50 s with 86cc watercooled mini stroke
87 elite 50 race bike mhr 72cc
91 yamaha tzr 250r
Re: intake port
nnnnNOOOOOOOOOOOOOO........................................................................................................periodsWheelman-111 wrote:Greetings;
Someone else here ax-ted that question about 2-3 years ago. A Respected Forumista replied:
nnnNOOOOOOOOoooooooo
Evidently someone (or several) thought the same and lived to regret cutting out that little brace. It is a pretty long floor right where the hot part of the case meets the cold. Don't do it.
RideRed
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"
<(2)Gyro S><Helix><Sym Wolf>
"Live Large - Ride Small"